ADEMCO VISTA-128B Guia de preparacion descargar pdf (Pagina 116)

VISTA-128B Installation Instructions

20-2

Type 02: Entry/Exit #2 Burglary

This zone type provides a secondary entry delay

whenever the zone is faulted if the panel is armed

in the AWAY and STAY Modes. When the panel is

armed in the INSTANT or MAXIMUM Mode, no

entry delay is provided. Secondary exit delay

begins whenever the control is armed, regardless

of the arming mode selected. These delays are

programmable. This zone type is usually assigned

to sensors or contacts on doors through which

more time is needed to get to and from the

keypad. Delay times for this zone type must be

greater than zone type 01 (e.g., a garage, loading

dock, or basement door).

Type 03: Perimeter Burglary

This zone type gives an instant alarm if the zone

is faulted when the panel is armed in the AWAY,

STAY, INSTANT or MAXIMUM mode. This zone

type is usually assigned to all sensors or contacts

on exterior doors and windows.

Type 04: Interior, Follower

This zone type gives a delayed alarm (using the

programmed entry/exit time) if the entry/exit zone

is faulted first. Otherwise this zone type gives an

instant alarm. This zone type is active when the

panel is armed in the AWAY or MAXIMUM mode.

MAXIMUM mode eliminates the entry delay.

This zone type is bypassed automatically

when the panel is armed in the STAY or

INSTANT mode. This zone type is usually

assigned to a zone covering an area such as a

foyer, lobby, or hallway through which one must

pass upon entry or exit (After faulting the

entry/exit zone to reach the keypad to disarm the

system.) Since this zone type is designed to

provide an instant alarm if the entry/exit zone is

not violated first, it will protect an area in the

event an intruder hides on the premises prior to

the system being armed, or gains access to the

premises through an unprotected area.

Type 05: Trouble by Day/Alarm by Night

This zone type will give an instant alarm if faulted

when armed in the AWAY, STAY, INSTANT or

MAXIMUM (night) mode. During the disarmed

state (day), the system will provide a latched

trouble sounding from the keypad (and a central

station report, if desired). This zone type is

usually assigned to a zone that contains a foil-

protected door or window (such as in a store), or to

a zone covering a "sensitive" area such as a stock

room, drug supply room, etc. It can also be used

on a sensor or contact in an area where immediate

notification of an entry is desired.

Type 06: 24-Hour Silent Alarm

This zone type sends a report to the central

station but provides no keypad display or

sounding. This zone type is usually assigned to a

zone containing an Emergency button.

Type 07: 24-Hour Audible Alarm

This zone type sends a report to the central

station and provides an alarm sound at the

keypad and an audible external alarm. This zone

type is usually assigned to a zone that has an

Emergency button.

Type 08: 24-Hour Auxiliary Alarm

This zone type sends a report to central station

and provides an alarm sound at the keypad. (No

bell output is provided.) This zone type is

usually assigned to a zone containing a button for

use in personal emergencies, or to a zone

containing monitoring devices such as water

sensors, temperature sensors, etc.

Type 09: Supervised Fire (Without Verification)

This zone type provides a fire alarm on short

circuit and a trouble condition on open circuit. The

bell output must be programmed to pulse when

this zone type is shorted. This zone type is always

active and cannot be bypassed.

Type 10: Interior with Delay

This zone type gives entry and exit delays (using

the programmed entry/exit time), if tripped when

the panel is armed in the AWAY mode. This zone

type is also active during MAXIMUM Mode, but

no entry delay is provided (alarms occur

immediately if zone is tripped). This zone type is

automatically bypassed when the panel is

armed in the STAY or INSTANT mode. Delay

begins whenever sensors in this zone are violated,

regardless of whether or not an entry/exit delay

zone was tripped first.

Type 20: Arm-STAY*

This is a special-purpose zone type used with 5800

Series wireless transmitters, which will result in

arming the system in the STAY Mode when the

zone is activated.

Type 21: Arm-AWAY*

This is a special-purpose zone type used with 5800

Series wireless transmitters, which will result in

arming the system in the AWAY Mode when the

zone is activated.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 251 252

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-128B Guia de preparacion Pagina 116

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-128B