ADEMCO VISTA-128B Guia de preparacion descargar pdf (Pagina 101)

17-1

SECTION 17

4100APG Pager Interface

•••••••••••••••••••••••••••••••••••••••••••••••••

In This Section

♦

General Information

♦

Mounting the 4100APG

♦

Wiring the 4100APG

♦

Programming the Control for the Pager

♦

4100APG LED Indications

•••••••••••••••••••••••••••••••••••••••••••••••••

General Information

Whenever an event occurs on the VISTA-128B, a message can be sent to a pager. This is

accomplished by using the 4100APG Pager Interface. The 4100APG will dial and send the

information to a paging service. It will transmit to the pager any message programmed to be

sent to the event log printer, even if the printer is not being used.

The types of messages are divided into 6 categories: Alarms; Troubles; Bypasses;

Openings/Closings; System and Test. The VISTA-128B can be programmed so each type of

message transmits to a different pager. Each type has its own programming field for the

pager phone number and pager ID. Of course, these could be sent to the same pager by

programming those fields with the same pager phone number and ID.

The 4100APG will hang up between each message. Multiple messages will be sent in the

order received. If the 4100APG cannot make contact with the paging service, it will retry up

to 10 times. If the interface loses contact with the VISTA-128B, it will send a message to the

paging service to notify the user.

The pager interface must be wired to a different phone line than the VISTA-128B itself. Otherwise,

the communication of both will not function properly.

Mounting the 4100APG

The 4100APG may be mounted in the control cabinet if space is available or, if this is not

possible, on the side of the cabinet or adjacent to it. Pry off the pager interface’s cover prior to

wiring.

When the 4100APG is mounted inside the control cabinet, attach it to the cabinet's

interior surface with 2-faced adhesive tape. You may leave the interface's cover off if it is

mounted within the cabinet.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 251 252

Sin comentarios

ADEMCO VISTA-128B Guia de preparacion Pagina 101