ADEMCO Vista 4130XT Manual de instrucciones Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
FUNCTION
ADDRESS
DESIGNATE RIGHT
ZONE USAGE
NOT USED
ENTRY DELAY #1
EXIT DELAY #1
*06
*Q7
*o6
*Q9
*1Q
10 11 12 13 14 15 16
lnmlmlzoneslo-16
17
•1
Zone 17
COMMENTS: All spaces must be filled with O or 1 (1 if that zone is a right loop on a 4190WH transponder or on a
4196 Quad PIR transponder). When the 4208 E used as a Zone Expander, set all zone number locations to O.Sim-
ilarly, set the zone number Iocatlons for 4194WH contact/transponders, 4192 smoke detector base/transponders,
and 4275 Dual PIR transponders to O, as well as left loops on 4190WHS and the PIR portion of the 4196.
o
COMMENTS: Defines the time per!od between a fault occurring In a zone to which Entry Delay #1 has been
assigned and the time when the alarm will sound (UL 1023 Household Burglary usage permits a maximum of 45
seconds. ) Applies to the Interior, Delay Zone type also
Enter 00-15. Multiply by 15 seconds to determine time delay (O- 225 seconds available).
o
COMMENTS: Defines the time delay period after the system arming code IS keyed when zone to which this delay
has been assigned will arm (UL 1023 Household Burglary usage permits a maximum of 60 seconds). Is also the
exit delay time allocated to the Interior zones (both Follower and Delay types).
Enter 00-15. Multiply by 15 seconds to determine time delay (O-225 seconds available).
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Comentarios a estos manuales

Sin comentarios