ADEMCO Vista 4130XT Manual de instrucciones descargar pdf (Pagina 4)

The VISTA 4130XT IS a microprocessor-based security control which

provides up to 9 wired zones in the basic product, with expansion to an

additional wired zones when connected toa2-wire zone expansion bus

driven bytheoptional No.4152LM Loop Module Thesecurity control is

housed in a wall-mounled plastlc enclosure measurmg only 8.4” (21.3

cm) wide x 4.75 (12 cm) high x 1.1” (2.8 cm) deep, and is equipped with

a multifunction 12-key digital keypad, a multipurpose LCD English lan-

guage display and a built-in 85 db piezoelectric sounder that meets UL

requirements as an alarm sounder (an external sounder IS therefore

optional). ConnectIons to the security ,control are made via a 24-pm plug-

in connector equipped with flylng leads which interface to the wired

loops, plug-in DC Power Pack, back-up battery, optional external alarm

sounder, etc.

The security control is programmable from its own keypad or from a

4137 or 4157 remote console (optional), and can also be programmed

locally from the 699 Programmer (using a 695-30XT cartridge).

Programmed options to eslablish specific alarm and reporting features

are stored in electrically erasable, non-volatile EEPROM memory. This

means that the unit can be reprogrammed many times (unlike umts

equipped with PROMS) and that information which has been

programmed will not be lost in the event of a complete loss of power. For

installer convenience, the control is factory-programmed to a set of

values that is designed to meet the needs of many installations. However,

these can be altered by the installer to suit the specific needs of a

particular installation or installation company, following the instructions

provided in the programming section of this manual (factory-programmed

values are also shown in this section).

A plug-in Communication Interface board (4171 XT) is required with this

system and provides communication capability (central station reporting,

etc,) over existing telephone lines as well as zone expansion

connections.

An optional, economical, remote keypad (4131 or 4147) can be used for

arming, dmarmmg, etc., from a remote indoor location within the pro-

tected premises, This unit is a compact 12-button keypad with two sys-

iem status indicators (LEDs) and a built-in p!ezoelectric sounder that

provides warning and alarm sounds. Requires a 10-wire connecbon to

the control.

An optional remote console (41 57) will provide system status indications

and WIIIperm[t virtually all system control functions from its keypad. The

console will also provide visible and audible indications of troubles and

alarms by means of LEDs and numeric (zone number) display and bullt-

In piezoelectric sounder. Requires only a 4-wire connection to the

control

An optional remote console (41 37) is available which is identical to the

4130XT control in Its appearance, system operation, LCD displays, and

loud piezoelectric alarm sounder. Requires only a 4-wire connection to

the mam control.

A complete list of optional accessories will be found m a section toward

the end of this manual under the heading “Optional Accessories” (see

Index).

Zone Characteristics

Zone 1:

zones 2-a

Zone 9

Programmable Zone, may be used as EOLR superwsed Fire

Zone (supports 2-wire Smoke Detectors), or may be used as

a non-fire zone with N C contacts only, 350-500 msec

response.

Programmable Zones, EOLR supervised, 350-500 msec

response

Programmable Zone, NC. contacts only, fast 10-15 msec

response.

1 2 3 4 5 6 7 8 9 ... 83 84

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista 4130XT Manual de instrucciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista 4130XT