ADEMCO Alpha Vista Console Manual de usuario descargar pdf (Pagina 6)

Il. ZONE CONFIGURATIONS

ZONE WPE DEFINITIONS

The 5140XM System albws up to M zones of hard-wire and polfing tip protection. Each zone must be assi~d

to a zone type, whkh defines the way in whiih the system respnds to fauhs in that zone. In addition, there are

several “system zones” for keypad panics, pelting ~p fauks, etc. whch must be assigned a zone type. Seethe

“SyQem Zone” section for a fist of these zones.

TW 00

Zone Hot Uaad

TW 01

Entry/Exit #l Burglary

Tyw 02

Entry~xlt #2 Burglary

TyPS

Perimeter Burglary

TW 04

Interior, Follower

rye 05

Trouble by Day/Alarm

by Night

TYW 06

24.hOur Silent Alarm

TYW

24-hour Audible Alarm

TYPS

24-hour Auxlliaq

Alarm

Program a zone wkh this zone type if the zone is not used.

This zone type provides entry delay whenever the zone is faulted if the wntrol is

armed in the Away or Stay modes. When the panel is armed in the Instant or

Maximum modes, no entry delay is provided. Exit delay begins whenever the

mntrol is armed, regardless of the arming mode selected. These delays are

programmable. This zone type is usually assigned to sensors or mntacts on

doors through which primary entry and exit will take place.

This zone type provides a secondary entry delay whenever the zone is faulted if

the panel is armed in the Away and Stay males. When the panel is armed in the

Instant or Maximum modes, no entry delay is provided. Secondary exit delay

begins whenever the mntrol is armed, regardless of the arming mode selected.

These delays are programmable. This zone type is usually assigned to sensors or

contacts on doors through which seconda~ entry and exit will take place, and

where more time might be needed to get to and from the ~nsole. Delay time must

be greater than Zone type 1. (Ex.: a garage, bading dock, or basement door)

This zone type gives an instant alarm if the zone is fauked when the panel is

armed in the Away, Stay, Instant or Maximum modes. This zone type is usually

assigned to all sensors or contacts on efierior doors and wintiws.

This zone type gives a delayed alarm (using the programmed Entry/exit time) f

the Entry/Exit zone is faulted first. Otherwise this zone type gives an instant

alarm. This zone type is active when the panel is armed in the Away or mmi’ m

modes. Maximum mode eliminates the delay though. This zone ty~~”s

bypassed automatically when the panel Is armed in the Stay or

Instant modes. This zone type is usually assigned to a zone covering an area

such as a foyer, bbby, or halhay through which one must pass upon entry (After

fauting the entry/exif zone to reach the console to disarm the system.) Since this

zone type is designed to provide an instant alarm if the ent~/exif zone is not

violated first, if will protect an area in the event an intruder hides on the premises

prior to the system being armed, or gains access to the premises through an

unprotected area.

This zone type will give an instant alarm if faulted when armed in the Away, Stay,

Instant or Maximum (night) modes, During the disarmed state (day), the system

will provide a latched trouble sounding from the console (and a central station

report, if desired). This zone type is usually assigned to a zone which contains a

foil-protected door or window (such as in a store), or to a zone covering a

“sensitive” area such as a stock room, drug supply room, etc. This zone type can

also be used on a sensor or contact in an area where immediate notification of an

entry is desired.

This zone type sends a report to the Central Station but provides no console

dsplay or sounding. This zone type ie usually assigned to a zone containing an

Emergency button.

This zone type sends a report to the Central Station, and provides an alarm sound

at the console, and an audible external alarm. This zone type is usually assigned

to a zone that has an Emergency button.

This zone type sends a report to Central Station and provides an alarm souti at

the console, (No bell output is provided). This zone type is usually

assigned to a zone containing a button for use in personal emergencies, or to a

zone containing non-fire related monitoring devices such as water se:=,s,

temperature sensors, etc.

-6-

1 2 3 4 5 6 7 8 9 10 11 ... 73 74

Comentarios a estos manuales

Sin comentarios

ADEMCO Alpha Vista Console Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Alpha Vista Console