ADEMCO Alpha Vista Console Manual de usuario descargar pdf (Pagina 40)

EWNT LOGGING PROCEDURES

IMPORTANT: In order for time and date stamping to occur, the system’s real-time clock must be set.

Refer to the SETTING THE REAL TIME CLOCK section for details.

GENERAL The system has the atihty to record vafious events in a histo~ log (224 eveniu

INFORMATION

capacity) wherein each event is recorded in one of five categories (alarm,

supewiso~/check, bypass, open & system), with the time and date of its

occunence (if real-time clock is set). The log maybe viewed (Display Mode) on the

alpha console, or can be ptinted (Ptint Mode) on a sefial ptinter (connected to the

system via a 41 OOSM Serial Module; see TRIGGER OUTPUTS section for

connection details).

EVENT LOG MODE COMMANDS

Display Mode: Enter user code + [#]+ [6] + [0]

Print Mode: Enter user code + [#]+ [6] +

[1]

Clear Event Log: Enter user code + [#] + [6] + [2]

To EXIT Event Log Mode: Press [*] at any time.

PROGRAMMING The system can be configured for the following event log activities

To-either record even~s but not print them unless commanded to do so, or to

automatically ptint the events as they occur (field 1’72).

Specific categories of events to be logged can be selectively enabled (field

1.70).

The time stamp can be programmed for either 12 or 24 hour formats (field

1’71).

The printer baud rate can be set to either 300 or 1200 baud (field 1.73).

Set event log fime/date repoti enable (fields 1-40& 1’41 ).

Enable reDoflino of event Ioa caDacitv (i.e.. 50”/0 full, 907~ full & overflow)

programmed in fields 1“40 & 741 ~ -

EWNT LOGGING Afler entering either mode, the following will be displayed:

DISPLAY & PRINT

‘oDES ~

The Event Log holds up to 224 events, and can display

ptint all events in a catego~ (complete), or only tho~w”

events in a catego~ occurflng since the last Clear Event

Log command (recent). Note that once the Event Log is

full, the oldest event will be erased upon the logging of any

new event. Press the desired display mode key, O or

For display and printing purWses, events are grouped

into five categories as follows. Use the [3] & [1] keys to

scroll to the next or previous category screens

~ ~~~~~ebeenrestored.

Displays time/date for zones that have either caused an

Displays time/date for zones that have caused a trouble

or fire supewiso~ condition.

Displays time/date for zones that have been bypassed.

Displays time, date and user number for each arming and

disarming of the system.

Displays fime/date for system problems, such as AC

Loss, communication failure, etc.

Displays all categories of events in chronological order,

from most recent to oldest.

SCREEN DEFINITIONS

RECENT

Events since last CLEAR

COMPLETE Displavs all events

WPE

Type of event (Burg., fire, etc. )

ccc

Zone (contact) number

Uuu User number

-40–

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 73 74

Comentarios a estos manuales

Sin comentarios

ADEMCO Alpha Vista Console Manual de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Alpha Vista Console