ADEMCO Alpha Vista Console Manual de usuario descargar pdf (Pagina 39)

SETTING THE REAL-TIME CLOCK

The panel uses the real-time clock to trigger test report transmissions and to

time/date stamp events written into the event log. The clock must be set for these

features to work properly. The clock can be set from fhe console using the

procedure below or via the downloading software.

To enter real-time clock mode, enter installer code + #63. The display will

show:

The “? indicates the current mode. The [6] key changes the mode from DAY to

HOUR to MINUTE to MONTH to DATE to YEAR. The [4] key changes the mode

in reverse order.

The [3] & [1] keys are used to set the TIME/DATE values. T~e [3] key moves the

TIMHDATE ahead, the [1] key moves the TIM HDATE backward.

To Set the day, use the [3] or [1] key to change from ? ON to MON to TUE,

etc.

To set the time, press [6] until the “? appears in the hours position, then use

the [3] or [1] key to set the hour. Press [6] again and use the [3] or [1] key to set

the minute. Use the [~ key to set AM or PM.

To set the date, press the [6] key until the “?” appears in the month position,

then use the [3] or [1] key to set the month. Press the [6] key again and use the

[3] or [1] key to set the date. Press the [6] key again and use the [3] or [1] key to

set to set the year.

To exit clock mode, press either the [8] key or the p] key. Exiting wilh the [8]

key will save all changes. Exiting with the p] key will exit without changing any of

the values (used when viewing the time settings, but no changes are desired).

–39–

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 73 74

Sin comentarios

ADEMCO Alpha Vista Console Manual de usuario Pagina 39