ADEMCO Alpha Vista Console Manual de usuario descargar pdf (Pagina 46)

PROG~MMiNG STEPS

(cont.)

5. Use #93 Menu Mode for device programming

Refer to the DEVICE PROGRAMMING section to assign console ID numbers,

and to selectively suppress certain console soundng.

6. Use #93 Menu Mode for programming alpha descriptors

Refer to the ALPWA PROGRAMMING section to enter zone descriptors and ‘“’

a custom installers message.

7. Exit Programming Mode

Exit programming mode by pressing either ’98 or ’99. A second entry of ●99

is required if the exit is being done from fields 1’00 to 1’99, and a ttird entry

of .99 is required if exit is being done from fields 700 and abve. To prevent

re-access to Programming mode using the Installers code, use ’98. The only

way to re-access Programming mode is by depressing both the ~] and [#]

keys at the same time within 30 seconds of power up. Exiting by using ’99

always allows reentry into Programming mode using the Installer’s code.

Either way of exiting will allow access via downloading.

–46–

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

Sin comentarios

ADEMCO Alpha Vista Console Manual de usuario Pagina 46