ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 74)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

5-14

FIELD

TITLE and DATA ENTRIES EXPLANATION

2*30

Pager Installed

= disable

= enable

Enable if the alphanumeric pager interface is installed.

2*31

Delay Paging

= disable

= enable

This field has eight locations, one for each pager. If enabled, the system

waits the delay time specified in field 2*32 before transmitting the

message after the dialer completes sending the message.

2*32

Time to Delay Pager After Dialer

000-024

times 10 seconds (010-240).

This delay should be set to allow enough time for the central station to

call back the premises in order to verify an alarm condition. Field 2*31

must be enabled.

2*33

Pager 1 Phone Number

Enter

0-9; #11

for *

, #12

for

#, #13

for

a 2-

second pause.

Enter the paging service phone number for Pager 1. Enter up to 17 digits.

Do not fill unused spaces.

2*34

Pager 1 ID Number

Enter

0-9

Enter the Pager ID number for Pager 1. Enter up to 10 digits.

2*35

Pager 1 Format

= numeric

= ID

= alphanumeric

Enter the pager format for Pager 1.

2*36

Pager 1 Delay 1

000-060

seconds.

This delay occurs after the phone number is dialed and before the pager

ID is sent, giving the pager system time to answer the phone call.

NOTE:

Program only if using numeric format.

2*37

Pager 1 Delay 2

000-060

seconds.

This delay occurs after the pager ID is sent and before the event

information is sent.

NOTE:

Program only if using numeric format.

2*38

Pager 1 Partition Enable

= disable

= enable

This field has eight entries, one for each partition. If enabled, the system

sends messages to Pager 1 for the partition(s).

2*39

Pager 1 Trigger Event Enables

= disable

= enable

This field has five entries as follows: Alarm, Trouble, Bypass, Open/Close,

System.

If enabled, the system sends a signal to the pager.

2*40

Pager 2 Phone Number

Enter

0-9; #11

for *

, #12

for

#, #13

for

a 2-

second pause.

Enter the paging service phone number for Pager 2. Enter up to 17 digits.

Do not fill unused spaces.

2*41

Pager 2 ID Number

Enter

0-9

Enter the Pager ID number for Pager 2. Enter up to 10 digits.

2*42

Pager 2 Format

= numeric

= ID

= alphanumeric

Enter the pager format for Pager 2.

2*43

Pager 2 Delay 1

000-060

seconds.

This delay occurs after the phone number is dialed and before the pager

ID is sent, giving the pager system time to answer the phone call.

NOTE:

Program only if using numeric format.

2*44

Pager 2 Delay 2

000-060

seconds.

This delay occurs after the pager ID is sent and before the event

information is sent.

NOTE:

Program only if using numeric format.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 74

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS