ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 10)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

1-4

Additional Features

•

Provides up to 60 installer-defined, custom words that can be used for zone descriptors.

•

Provides 32 keypad macro commands (each macro is a series of keypad commands of up to 32 keystrokes) using the

A, B, C, and D keys by partition.

•

Provides cross-zone capability, which helps prevent false alarms by preventing a zone from going into alarm unless

its cross-zone is also faulted within a 5-minute period.

•

Contains a built-in User’s Manual, which provides the end user with a brief explanation of the function of a key

when the user presses any of the function keys on the keypad for 5 seconds.

•

Provides trigger outputs, which may interface with Long Range Radio equipment or other devices such as keyswitch

LEDs, printer, or pager.

•

Provides an RS232 input for serial data. This is useful for interfacing the system with Automation software.

Automation software cannot be used if a serial printer is used on the system.

At least one 2-line alpha keypad (6139/6160) must be connected to the system for programming (if you are using

keypad programming), and must remain connected to the system in order to allow the primary user to program

additional user codes into the system at a later time.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 127 128

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 10