ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 73)

Section 5 – Data Field Descriptions

5-13

FIELD

TITLE and DATA ENTRIES EXPLANATION

2*09

Open/Close Reports by

Exception (partition-specific)

= disable

= enable

If enabled, Open/Close reports are sent

only if

the openings/closings

occur

outside

the arm and disarm windows.

NOTES:

Open reports are also suppressed during the closing window in order to

prevent false alarms if the user arms the system, then re-enters the

premises, for example to retrieve a forgotten item.

Openings and closings are still recorded in the event log.

This field

must

be set to

if No Opening and No Closing reports are to be

sent.

2*10

Allow Disarming Only During

Arm/Disarm Windows (partition-

specific)

= disable

= enable

If enabled, disarming of the system is allowed only during the

arming/disarming windows, or if the system is in alarm (if 2*11 is set to

1).

NOTE:

This applies

only

to Operator-level users. Installer, Master, and

Manager-level users can disarm the system at any time.

2*11

Allow Disarm Outside Window if

Alarm Occurs

= disable

= enable

If enabled, allows the system to be disarmed outside the programmed

disarm (opening) window if an alarm has occurred. Otherwise disarming

is allowed only during the disarm window.

NOTE:

Used only if field 2*10 is enabled.

2*18

Enable GOTO for this Partition

(partition-specific)

= disable

= enable

If enabled, this partition can be accessed from another partition’s keypad

using the GOTO command.

2*19

Use Partition Descriptor

= disable

= enable

If enabled, the normal keypad display will include a partition number and

four-digit descriptor.

2*20

Enable J7 Triggers for Partition

(partition-specific)

= disable

= enable

If enabled, the J7 triggers function for this partition.

2*21

Supervision Pulses for LRR

= disable

= enable

There are three entries in this field as follows: Fire, Burglary/Audible

Panic, Silent Panic/Duress.

If enabled, causes the control to send periodic short pulses on the J7 radio

triggers to the LRR. The LRR uses these pulses to determine that its

connection to the control is still intact.

Must be

for UL installations.

2*22

Display Fire Alarms of Other

Partitions (partition-specific)

= disable

= enable

If enabled, allows fire alarms that occur on other partitions to be

displayed at this partition’s keypad(s).

2*23

Display Burglary & Panic Alarms

for Other Partitions (partition-

specific)

= disable

= enable

If enabled, allows burglary and panic alarms that occur on other

partitions to be displayed at this partition’s keypad(s).

2*24

Display Troubles of Other

Partitions (partition-specific)

= disable

= enable

If enabled, allows troubles that occur on other partitions to be displayed

at this partition’s keypad(s).

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS