ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 13)

Section 2 – Partitioning and Panel Linking

2-3

Sequence #2:

Office 1 Office 2 Lobby Action

User #2:

(Armed) Disarms Disarms

User #1:

Disarms (Disarmed) (No change)

User #2:

(Disarmed) Arms No Change

User #1:

Arms (Armed) No Change

Notice that in sequence #1, because Office #2 was the last to arm, the lobby also armed (Office #2 is programmed to

affect and arm the lobby). In sequence #2, the lobby could not arm when Office #2 armed, because Office #1, which

affects the lobby, was still disarmed.

When Office #1 armed, the lobby still did not arm because Office #1 was not programmed to arm the lobby. User #1

would have to arm the lobby manually. Therefore, you would want to program a partition to affect and arm the lobby if

the users of that partition are expected to be the last to leave the building.

How User Access Codes Affect the Common Lobby

Codes with Global Arming

If a code is given "global arming" when it is defined (see

SECTION 9: User Access Codes

), the keypad prompts the user

to select the partitions they want to arm. Only the partitions the user has access to are displayed. This allows the user

to choose the partitions to be armed or disarmed, and so eliminates the "automatic" operation of the lobby. Keep in

mind, however, that if a user attempts to arm all, and another "affecting" partition is disarmed, the user cannot arm the

lobby, and the message "UNABLE TO ARM LOBBY PARTITION" is displayed.

Codes with Non-Global Arming

If a user arms with a non-global code, the lobby partition operation is automatic, as described by fields 1*18 and 1*19.

Other Methods of Arming/Disarming

Common Lobby logic remains active when arming or disarming a partition that affects and/or arms the common lobby in

one of the following manners:

•

Quick-Arm

•

Keyswitch

•

Wireless Button

•

Wireless Keypad

Arming/Disarming Remotely

If a user arms or disarms remotely (through Compass downloading software), the lobby does not automatically follow

another partition that is programmed to arm or disarm the lobby. The lobby must be armed separately, after arming all

affecting partitions first.

Auto-Arming/Disarming

If scheduling is used to automatically arm and/or disarm partitions, the common lobby partition does not automatically

follow another partition that is programmed to arm or disarm the lobby. The lobby must be included as a partition to be

armed/disarmed and must be scheduled as the last partition armed.

If you are using auto-arming, make sure that the Auto-Arm Delay and Auto-Arm Warning periods, for the lobby

partition, (fields 2*05 and 2*06) combined are longer than that of any other partition that affects the lobby. This

causes the lobby to arm last.

Master Keypad Setup and Operation

Although this system has eight actual partitions, it provides an extra partition strictly for the purpose of assigning

keypads as Master keypads for the system.

Assigning any keypad to Partition 9 in

Device Programming

in the

#93 Menu Mode

makes that keypad a Master keypad.

A Master keypad reflects the status of the entire system (Partitions 1-8) on its display at one time. This is useful

because it eliminates the need for a building security officer to have to log on to various partitions from one partition's

keypad to find out where an alarm has occurred.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS