ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 15)

Section 2 – Partitioning and Panel Linking

2-5

•

Users 001-050 are the only users that can perform panel linking and are automatically assigned panel

linking access when added to the system.

•

An alpha keypad must be used for panel linking.

•

The system may take up to 7 seconds to respond to a command when in a panel linking mode

NOTE:

A user cannot access partitions or panels that they have not been assigned to.

Panel Link Module Supervision

The Panel Link Module can be supervised for its connection to the control panel. The module’s supervisory zone is zone

8xx, where “xx” = the ECP address of the PLM. You must program that zone with response type 05 (Day/Night) in

Zone

Programming

in the

#93 Menu Mode

(refer to the

Programming Guide

for detailed programming instructions). If you

want to report the supervisory failure to the central station and/or to a paging service, the appropriate reporting

parameters for that zone must be programmed.

If you want the supervisory failure of PLM(s) on other linked control panels to display on this control panel, they must

be programmed into

Zone Programming

in the

#93 Menu Mode

with response type 14 in this control panel (refer to the

Programming Guide

for detailed programming instructions). The panel ID number for each module must match the

panel ID number programmed in

Device Programming

of its “host” VISTA-128BP/VISTA-250BP.

How to Use Panel Linking

Panel Linking can be used in any of three different modes:

•

Single-Partition, Single-Panel

−

displays status of a partition on a remote control panel and allows control of that

remote control panel.

•

Multi-Partition, Multi-Panel Mode

−

displays status and allows arming/disarming of multiple partitions at once on

a remote control panel.

•

Multi-Panel View Mode

−

displays status and allows arming/disarming of multiple remote control panels at a time.

NOTE:

A user will not be able to access or view partitions or panels that they have not been assigned to.

Single-Partition Single-Panel Mode

To access the Single-Partition, Single Panel mode, perform the following steps:

Step Action

1 Enter

User Code (for users 001-050)

[#]

[86].

2 Enter the panel ID number

(01-08)

of the panel you want to link to.

3 Enter the partition number of the panel. The keypad displays “AWAITING PANEL LINK.” After a few

seconds, the keypad displays the status of the partition along with the panel ID number and partition

number flashing in the upper right-hand corner. The user now has full control of the remote control panel.

All functions can be performed except the following:

•

Those limited by the user’s authority level.

•

The user cannot enter Installer Program mode.

•

The user cannot execute another panel linking mode.

NOTE:

To execute another panel linking mode or to access a different remote panel, the user must first exit

this mode (return to the original control panel).

4 To exit, enter the

User Code (for users 001-050)

[#]

[85].

After a few seconds, the keypad displays the

status of the original partition for the keypad.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS