ADEMCO Vista-128B PLUS Especificaciones descargar pdf (Pagina 71)

Section 5 – Data Field Descriptions

5-11

FIELD

TITLE and DATA ENTRIES EXPLANATION

1*49

Suppress Transmitter

Supervision Sound

= disable

= enable

If enabled, no trouble soundings occur on the keypad for transmitter

check-in failures.

Must be

for UL.

1*52

Send Cancel If Alarm + Off

(partition-specific)

= disable

= enable

If enabled, Cancel reports are sent when the system is disarmed after an

alarm, regardless of how much time has gone by.

If disabled, Cancel reports are sent within Bell Timeout period only.

1*53

Disable Download Callback

= callback required

= no callback required

Select whether a callback from the control panel is required for

downloading.

Must be

for UL installations.

1*55

International Date Format

= disable (mm/dd/yy)

= enable (dd/mm/yy)

Select the date format for display in the event log.

1*56

AC 60Hz or 50Hz

= 60Hz

= 50Hz

Select the frequency for the AC.

Must be set to

for U.S. and Canadian installations.

1*57

Enable 5800 RF Button Global

Arm

= disable

= enable

If enabled, the system arms/disarms in accordance with the button’s

user’s global arming settings.

1*58

Enable 5800 RF Button Force

Arm

= disable

= enable

If enabled, allows the RF button user to force a bypass of all faulted zones

when arming the system.

NOTE:

When attempting to arm the system, the keypad beeps once after

the button is pressed if any faulted zones are present. The user should

then press the button again within 4 seconds to force-bypass those zones

and arm the system.

1*60

Zone 5 Audio Alarm Verification

= disable

= enable

If enabled, zone 5 is used for 2-way audio (AAV).

Must be 0 for UL installations.

NOTE:

Zone 5 cannot be used as protection zone.

1*69

Printer Type

= parallel printer

= serial printer

Select the printer type for the event log printout.

NOTE:

if you are using a parallel printer connected to the VA8201 Alpha

Pager Module.

1*70

Event Log Types

= disable

= enable

This field has five entries as follows: Alarm, Check, Bypass, Open/Close,

System. If enabled, the system logs those events into the event log.

NOTE:

Events are also logged into the PassPoint system, if installed.

1*71

12/24 Hour Type Stamp Format

= 12-hour

= 24-hour

Select the type of time stamping for the event log.

1*72

Event Log Printer On-Line Mode

= disable

= enable

If enabled, the system prints the events as they occur.

If disabled, the system prints the log only upon request.

1*73

Printer Baud Rate

= 1200

= 300

Select the baud rate for the serial printer.

NOTE:

Must be

if using the alphanumeric pager interface.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Especificaciones Pagina 71

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS