ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 48)

Vista 120 Training Guide 48

6.7 4285 Voice Interactive Phone Module

Training Module

• Terminate 4285 on to console bus.

• Connect the panel to the “C Com” jack on the 4285 line interface using the cable supplied

with the 4285.

• Take the cable previously used for the “mode 3” connection, and connect directly to “Wall”

jack on the 4285.

• Enter program mode.

• Go to location *20 to program the Voice Module access code. The first digit must be

programmed within the range of 01-09 and the second digit must be a *(11) or #(12).

• Go to location *44 and set ring detect to 1-14 rings or 15 = answering machine defeat.

• Go to location #93 and select “Device Prog”.

• The VIP must be assigned to address “4”.

• Select the device type “5”, Voice Module.

• Select the master partition that the users with access to are assigned to.

• Exit program mode.

• To access the VIP either pick up the touch tone phone on the premises and dial the phone

code or dial up the system as programmed in location *44.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 48