ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 28)

Vista 120 Training Guide

VISTA 120 PROGRAMMING FORM

Partition – Specific Fields

(Duplicate these pages for each partition in the installation)

1*19 ARMS COMMON AREA 3 [0]

Enter 1 if arming this partition attempts to arm area 3; enter 0 if not.

1*26 PANIC BUTTON OR SPEED KEY | | | |

A B C D

Enter 00 if the key will be used for a panic function or 01-32 for the

number of macro that will be executed when the key is pressed

1*43 PERM. KEYPAD BACKLIGHT [0]

1=enable; 0=disable When disabled, display lights when any key is

pressed, and turns off after period of keypad inactivity.

1*45 EXIT DELAY SOUNDING [0] 1=enable; 0=disable;Produces quick beeping during exit

delay if enabled

1*47 CHIME ON BELL/SIREN [0] 1=enable; 0=disable

1*52 SEND CANCEL IF ALARM + OFF [0] 1=no restriction; 0=within bell timeout period only

1*76 ACCESS CONTROL RELAY | [00] Relay will be pulsed for 2 seconds whenever code + [0] is

FOR PART. pressed. Enter 01-96; 00=none.

2*05 AUTO-ARM DELAY | [15] Enter the time between the end of the arming window and

the start of auto-arming warning period, in values of 1-14 times 4

minutes; 00=instant; [15=no auto arm at all]. When this delay expires,

the Auto-Arm Warning Period begins.

2*06 AUTO-ARM WARNING PERIOD | [00] This is the time during which the user is warned to exit

the premises prior to the auto-arming of the system (beeps every 15

seconds; “ALERT” displayed). Enter 01-15 minutes. 00=instant at end

of arming delay

2*07 AUTO-DISARM DELAY | [15] This is the time between the end of the disarming window and

the start of auto-disarming. Enter 01-14 times 4 minutes; 00=instantat end of

window; 15= no auto-disarm.

2*08 ENABLE FORCE ARM [0] 0=disable 1=enable

FOR AUTO-ARM

2*09 OPEN/CLOSE REPORTS [0] 1=enable; 0=disable; If enabled, only openings and closings

BY EXCEPTION occurring outside the scheduled opening/closing windows will trigger dialler

reports. Opening reports will also be suppressed during the closing window,

in order to prevent false reports when the user arms the system and then

reenters the premises to retrieve a forgotten item.

2*10 ALLOW DISARMING ONLY DURING [0]

ARMING/DISARMING WINDOWS 0=disable; 1=enable; See Systemwide field 2*11 if enabling field 2*10. This

feature adds high security to the installation.

2*18 ENABLE GOTO FOR THIS PART. [0] 1=Allow log-on from other partitions; 0=disable

2*20 ENABLE J7 TRIGGERS BY PART. [1]

0=disable for displayed partition; 1=enable for displayed partition

2*22 DISPLAY FIRE ALARMS OF [0] 0=No; 1=Yes

OTHER PARTITIONS

2*23 DISPLAY BURG & PANIC [0] 0=No; 1=Yes

ALARMS OF OTHER PARTITIONS

2*24 DISPLAY TROUBLES OF OTHER [0] 0=No; 1=Yes

PARTITIONS

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 52 53

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-120