ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 21)

Vista 120 Training Guide

VISTA 120 PROGRAMMING FORM

Some fields are programmed for each partition (shown as shaded fields). See the PARTITION-SPECIFIC section for programming these

fields. Standard default (*97) values are shown in brackets [ ], otherwise default = 0.

*43 SUPPRESS RF SIREN ACTIVATION

[0]

FOR FIRE ALARMS 1= suppress wireless siren (e.g. 5840) activation on fire alarms

0= wireless siren sounds for fire alarms

*44 RING DETECTION COUNT

[00]

01-14; 15=answering machine/fax bypass; 00=no detection.

*45 PRIMARY FORMAT

[0]

0=Low Speed; 1=Contact ID; 2=Ademco Exp. High Speed; 3=Ademco Express

*46 LOW SPEED FORMAT (Primary) [0]

0=Ademco Low Speed; 1=Sescoa/Radionics

*47 SECONDARY FORMAT [0]

0=Low Speed; 1=Contact ID; 2=Ademco Exp. High Speed; 3=Ademco Express

*48 LOW SPEED FORMAT (Sec.) [0]

0=Ademco Low Speed; 1=Sescoa/Radionics

*49 CHECKSUM VERIFICATION [0] [0] Prim Sec 1=yes; 0=no

*50 SESCOA/RADIONICS SELECT

[0] 1=Sescoa; 0=Radionics

*51 DUAL REPORTING

[0]

1=yes; 0=no; If used with Spilt Reporting "1" option (1*34), alarms and alarm

restores go to both primary & secondary numbers, while all other reports go to

secondary only. If used with Split Reporting "2" option, alarms and alarm

restores go to both, open/close and test messages go to secondary only, while all

other reports go to primary.

*52 STANDARD/EXPANDED REPORT [0]

FOR PRIMARY Alarm Rstr Bypass Trbl Opn/Cls Low Bat

0=standard; 1=expanded; Note: Expanded overrides choices in 4+2 format.

*53 STANDARD/EXPANDED REPORT [0]

FOR SECONDARY Alarm Rstr Bypass Trbl Opn/Cls Low Bat

0=standard; 1=expanded; Note: Expanded overrides choices in 4+2 format.

*54 MAX. No. OF DIALLER ATTEMPTS

[8] Enter 1-8.

*55 TELEPHONE SYSTEM SELECT

[00]

00= SECURITEL

† options 01 01= Australia

†

*56 CONTACT ID DATA ON KEYPAD

[0]

BUS FOR ALT. COMM. Media 1= Yes

Reporting Instead Of Digicom 0= No

*57 CONTACT ID DATA ON KEYPAD

[0]

BUS FOR BACK-UP Alt. Comm. 1= Yes

Media Reporting If Digicom Fails 0= No

*58 SELECTION OF CONTACT ID

MESSAGE DATA ON KEYPAD Alarms Troubles Bypasses Open/ System Test

BUS FOR SUBSCRIBER ID#1 [0][0][0][0][0][0] Close Conditions Reports

1=Yes; 0=No

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 52 53

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-120