ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 26)

Vista 120 Training Guide

VISTA 120 PROGRAMMING FORM

Some fields are programmed for each partition (shown as shaded fields). See the PARTITION-SPECIFIC section for programming these

fields. Standard default (*97) values are shown in brackets [ ], otherwise default = 0.

1*73 PRINTER BAUD RATE [0]

1=300; 0=1200

1*74 RELAY TIMEOUT XXX MINUTES | | [000]

Enter the relay timeout, 0-127 in multiples of 2 minutes, desired for #80 Menu

Mode time driven event relay command numbers "04/09" and #93 Menu Mode

Relay Programming output command "56".

1*75 RELAY TIMEOUT YYY SECONDS | | [000]

Enter the relay timeout, 0-127 seconds, desired for #80 Menu

Mode time driven event relay command numbers "05/10" and #93 Menu Mode Relay Programming command "57".

1*76 ACCESS CONTROL RELAY Partition-Specific

FOR PART.

1*77 LOG FIRST MAINTENANCE SIGNAL [0] 1= log first maintenance signal; 0= no logging

3rd Page Programming Fields (press *94)

2*00 NUMBER OF PARTITIONS [1] Enter the number of partitions used in this system, 1-8.

2*01 SUMMER TIME | | [04, 10]

START/END MONTH Start End

00-12; if no Summer time, enter 00,00

2*02 SUMMER TIME | [1, 5]

START/END WEEKEND # Start | End

Enter 1-7. 1=first; 2=second; 3=third; 4=fourth; 5=last; 6=next to last; 7=3rd

from last [1,5; 1st Sunday in April, last in Oct.]

2*05 AUTO-ARM DELAY Partition-Specific

2*06 AUTO-ARM WARNING PERIOD Partition-Specific

2*07 AUTO-DISARM DELAY Partition-Specific

2*08 ENABLE FORCE ARM Partition-Specific

FOR AUTO-ARM

2*09 OPEN/CLOSE REPORTS Partition-Specific

BY EXCEPTION Partition-Specific

2*10 ALLOW DISARMING ONLY DURING Partition-Specific

ARMING/DISARMING WINDOWS

2*11 ALLOW DISARM OUTSIDE WINDOW [0]

IF ALARM OCCURS Used only if field 2*10 (partition-specific field) is set to "1". If this field is

enabled ("1") the system can be disarmed outside the disarm window if an

alarm has occurred. If "0", disarming can only be done during the disarm

window. If field 2*10 is set to "0" for a partition, this field has no effect for

that partition.

2*18 ENABLE GOTO FOR THIS PART. Partition-Specific

2*19 USE PARTITION DESCRIPTORS [1] 1=enable 0=disable

2*20 ENABLE J7 TRIGGERS BY PART. Partition-Specific

2*21 ENABLE SUPERVISION PULSES | | [000]

FOR LRR TRIGGER OUTPUTS F B S

Used for supervised connection to a transmitter.

Enter 0 to disable or 1 to enable the listed outputs.

F= Fire; B= Burglary; S= Silent panic/duress.

2*22 DISPLAY FIRE ALARMS OF Partition-Specific

OTHER PARTITIONS

2*23 DISPLAY BURG & PANIC Partition-Specific

ALARMS OF OTHER PARTITIONS

2*24 DISPLAY TROUBLES OF OTHER PARTITIONS Partition-Specific

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 52 53

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-120