ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 32)

Vista 120 Training Guide 32

DEVICE PROGRAMMING – Cont.

• Enter Device Address Number (01 – 30).

• Press * to move to Device Type

• Enter the Required Device (To Program a 6139 Console – Enter “1”)

DEVICE TYPE DEVICE ALLOWABLE ADDRESS NUMBERS

1 Alpha Console 01 - 30

1 5800TM 28 - 30

3 RF Receiver 01 - 07

4 Output Relay Module 01 – 15

5 VIP Voice Module 04

• Press * to move to Console Partition

Enter the Console’s Home Partition (1-9), Entering a 9 will enable the Console as a Master Console

• Press * to move to Sound Option

• Enter Console Sounder Option Enter the Device Type “1” for Alpha Console

SOUND OPTION SOUNDS SUPPRESSED

0 No Suppression

1 Suppress Arm/Disarm & Entry/Exit beeps

2 Suppress Chime mode beeps only

3 Suppress Arm/Disarm, Entry/Exit & Chime beeps

• Press * to move to Keypad Global

• If Required enter “1” to enable this particular Console to allow Global Arm/Disarm functions.

• If a console is not enabled then a User with Global Arm/Disarming enabled will have to log to each

partition in turn .

• Press * to move to Device Address & Program next Device

• Continue until all Consoles are programmed in

• When finished Enter “00” & “*” to exit Device Address programming

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 52 53

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 32