ADEMCO VISTA-120 Guia de preparacion descargar pdf (Pagina 19)

Vista 120 Training Guide

3.4 Programming Form

Partition-Specific fields are programmed separately for each partition (shown as shaded fields). See the PARTITION-SPECIFIC section

for programming these fields. Standard default (*97) values are shown in brackets [ ], otherwise default = 0.

NOTE: New fields (phase 2) are indicated by dotted underlined field numbers and titles.

*00 INSTALLER CODE | | | [4140] Enter 4 digits, 0-9

*01 INSTALLER CODE RESTRICTION [0] 1 = Yes; 0 = No

*03 FINAL CONTACT SET (partition-specific) [0] 1 = Yes; 0 = No

*04 AUTOBYPASS EXIT ROUTE FAULTS [0]

(partition-specific) 1 = Yes; 0 = No

*05 ARM WITH LOW BATTERY [0] 1 = Yes; 0 = No

*06 ZONE TYPE 5 ALWAYS ALARM [0] 1 = Yes; 0 = No

*07 ALLOW ARMING WITH [0]

FAULTS IN EXIT ROUTE 1 = Yes; 0 = No

*08 SELF ACTIVATING SIREN OUTPUT [0] 1 = Yes; 0 = No

*09 ENTRY DELAY #1 Partition-Specific

*10 EXIT DELAY #1 Partition-Specific

*11 ENTRY DELAY #2 Partition-Specific

*12 EXIT DELAY #2 Partition-Specific

*13 BELL TIMEOUT Partition-Specific

*14 ZONE 9 RESPONSE TIME [0]

1 = fast response mode (10msec); 0 = normal response, 350msec

*15 KEYSWITCH ASSIGNMENT [0]

1-8; 0=disable

Enter partition in which keyswitch used.

*16 BELL/SIREN CONFIRMATION OF Partition-Specific

ARMING DING

*17 AC MAINS LOSS KEYPAD [0]

SOUNDING 1=yes; 0=no

*18 MAINS PRESENCE DISPLAY [0] 1 = Yes 0 = No

*19 RANDOMISE AC MAINS [0] ( 1 = recommended )

LOSS REPORT 1=10-40 min; 0=normal report

about 2 min. after AC loss

*20 TELEPHONE MODULE | | [00] [11]

PHONE CODE Enter 01 - 09 for first digit; enter 11 for "

" or 12 for "#" for second digit.

*21 PREVENT FIRE TIME-OUT [0]

1 = disable (no timeout); 0 = normal burglary alarm sounder duration

(programmed in partition-specific field *13)

*22 KEYPAD PANIC ENABLE Partition-Specific

*23 MULTIPLE ALARMS Partition-Specific

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Sin comentarios

ADEMCO VISTA-120 Guia de preparacion Pagina 19