ADEMCO Security System VISTA-15CN Guia de preparacion Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
VISTA-15/VISTA-15CN Installation and Setup Guide
15–14
93 SWINGER SUPPRESSION 0
0 = Unlimited, 1-15 = Number of alarms (1-9; # +10 = 10; # +11 = 11;
# +12 = 12; # +13 = 13; # +14 = 14; # +15 = 15
This option can be used to limit the number of messages (Alarm and Alarm
Restore reports) sent to the Central Station in an armed period.
UL installations: Must be set to 0 (unlimited reports).
DOWNLOAD
INFORMATION
(
94,
95)
94 DOWNLOAD PHONE NUMBER
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits as follows: 0–9; # +11 for
; # + 12 for #; # + 13 for a
pause. Do not fill unused spaces. Exit field by entering
. To clear entries
from field, press
94
.
95 RING DETECTION COUNT FOR DOWNLOADING 0
0-15 = number of rings before control picks up phone line
Refer to the chart below and program this field accordingly.
Phone
Module
Answering
Machine
Down-
loading
Field
95
Yes No No Set for value other than 0 (1-14). This enables
the control panel to answer the phone call.
Otherwise, it is not
possible to access the
phone module.
Yes Yes No Set for a value higher than the number of
r
ings for which the answering machine is set.
Example: If
machine is set for 4 rings, use a
value of 5 or higher. This is recommended so
that the phone module can still be accessed if
the answering machine is turned off and does
not answer the phone call.
Yes No Yes Set for value other than 0 (1-14).
Yes Yes Yes Enter 15 to bypass answering machine.
No No No Enter 0.
No Yes No Enter 0.
No No Yes Enter 1-14.
NOTE:
If 15 is entered
in field
95 to bypass
an answering machine,
and a 4285/4286 VIP
Module is included in
the system, you should
note the following:
When calling in from
an off-premises phone,
the user should make
the initial call, allow 1
to 3 rings only, then
hang up. The user
should then call again.
The Phone Module
seizes the line, and 2
long tones sound,
followed by the usual
voice prompt for the 2-
digit access code. If this
procedure is not
followed, Phone Module
operation will not be
possible.
No Yes Yes Enter 15. See note at left.
96 INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. NO. FOR
DOWNLOADING
Pressing
96 initializes the system for downloading.
97 SET ALL PROGRAM FIELDS TO DEFAULT VALUES
Pressing
97 automatically loads all defaults and erases any information
previously programmed.
98 EXITS PROGRAMMING MODE
Prevents re-entry by entering
Installer Code + 8 + 0 + 0
Allows re-entry only by powering up, then entering [
] and [#].
99 EXITS PROGRAMMING MODE
Allows re-entry to Program mode by entering
Installer Code + 8 + 0 + 0
; or
by powering up, then entering [
] and [#].
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 131 132

Comentarios a estos manuales

Sin comentarios