
WARNING
THE LIMITATIONS OF THIS ALARM SYSTEM
While this system is an advanced design security system, it does not offer guaranteed protection against burglary, fire or
other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a
number of reasons. For example:
● Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm
sensor or disconnect an alarm warning device.
● Intrusion detectors (e.g., passive infrared detectors), smoke detectors, and many other sensing devices will not work
without power. Battery operated devices will not work without batteries, with dead batteries, or if the batteries are not
put in properly. Devices powered soley by AC will not work if their AC power supply is cut off for any reason, however
briefly.
● A user may not be able to reach a panic or emergency button quickly enough.
● While smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not
activate or provide early warning for a variety of reasons in as many as
ss~o of all fires, according to data published the
Federal Emergency Management Agency. Some of the reasons smoke detectors used in conjunction with this system
may not work are as follows. Smoke detectors may have been improperly installed and positioned. Smoke detectors
may not sense fires that start where smoke cannot reach the detectors, such as in chimneys, in walls , or roofs, or on
the other side of closed doors. Smoke detectors also may not sense a fire on another level of a residence or building. A
second floor detector , for example, may not sense a first floor or basement fire. Moreover, smoke detectors have
sensing limitations. No smoke detector can sense every kind of fire every time. In general, detectors may not always
warn about fires caused by carelessness and safety hazards like smoking in bed, violent explosions, escaping gas,
improper storage of flammable materials, overloaded electrical circuits, children playing with matches, or arson.
Depending on the nature of the fire and/or the location of the smoke detectors, the detector, even if it operates as
anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death.
● Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagramed in their
installation manual. Passive Infrared Detectors do not provide volumetric area protection. They do create multiple
beams of protection, and intrusion can only be detected in unobstructed areas covered by those beams. They cannot
detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or
windows. Mechanical tampering, masking, painting or spraying of any material on the mirrors, windows or any part of the
optical system can reduce their detection ability. Passive Infrared Detectors sense changes in temperature; however,
as the ambient temperature of the protected area approaches the temperature range of 90 to 105 degrees Fahrenheit,
the detection performance can decrease.
● Alarm warning devices such as sirens, bells, or horns may not alert people or wake up sleepers who are located on the
other side of a closed or partly open doors. If warning devices sound on a different level of the residence from the
bedrooms, then they are less likely to waken or alerl people inside the bedrooms. Even persons who are awake may
not hear the warning if the alarm is muffled by noise from a stereo, radio, air conditioner or other appliances, or by
passing traffic. Finally, alarm warning devices, however loud, may not warn hearing-impaired people or waken deep
sleepers
● Telephone lines needed to transmit alarm signals from a premises to a central monitoring station maybe out of service
or temporarily out of service. Telephone lines are also subject to compromise by sophisticated intruders.
● Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect
themselves from the emergency situation. In the case of a monitored alarm system, authorities may not respond
appropriately.
● This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed
to last as long as 10 years, the electronic components could fail at any time.
The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance.
This alarm system should be tested weekly to make sure all sensors are working properly.
Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for
insurance. Homeowners, property owners and renters should continue to act prudently in protecting themselves and
cuntinue to insure their lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their
loved ones to learn about these developments.
66
Comentarios a estos manuales