ADEMCO Alpha Vista Console Manual de instrucciones descargar pdf (Pagina 49)

To disable Restore reports, program all locations in Addresses *69 - 71 as O.

1234

ZONE TTPEs 1-4

*69

[1[1[1[1

(See Address *O2 for Response

RESTORE REPORT types).

ENABLE

COMMENTS: Enables Restore reporting for individual

zone types. Enter 1 to select restore reporting

for the zone type; enter O to inhibit restore

reports.

ZONE TYPHS 5-8

*70

RESTORE REPORT

ENABLE

5678

[1[1[1[1

(See Address *O2 for Response

types) .

COMMENTS:

Enables Restore reporting for

individual zone types.

Enter 1 to select Restore

reporting for the Zone Type; enter O to inhibit

Restore reports.

9 10

ZONE

TYPES 9

*71

[ 1[ 1 (See Address *o2 for Response types)

AND 10 RESTORE

REPORT ENABLE

COMMENTS: Enables Restore reporting for

individual zone types. Enter 1 to select Restore

reporting for the Zone Type; enter O to inhibit

restore reports.

INTRODUCTIONTO FIELD ADDRESSES 72–81

In order to make it easier for an installer to understand expanded zone

reporting, an explanation and an illustrative example are given first.

Bearing in mind that a 2 digit reporting code is utilized, let us discuss how

zones 1-17, Duress, Zone Expander Supervisory, and the 3 keypad panics (1 & *, 3

& #, and * & #) can be coded.

The recurring theme of the following information

is that the leading digit represents the type of event being reported and the

second digit identifies the zone within that type.

NOTES :

WO digit entries are required because hexadecimal entries are allowed (O-

9, B-F) = (00-15) for fields 72-81.

2. Users of the Ademco CAPS Automation System are cautioned not to assign 78

or 8C for any report,

as these codes are reserved.

If Ademco High Speed Format is selected in either Addresses *46 or *48 and

the 4+2 Expanded Zone Format is selected in Address *53, a very fast 4+2

Format is created that uses DTMF (TouchTone) signaling instead of pulses.

Actually, 9 digits are transmitted but only the 4+2 portion of the message

is wer seen on the central station receiver’s display or printer.

This

High Speed 4+2 format is currently only compatible with Ademco No.

685

Digital Receiver operating with Revision 4.3 software or higher and has a

message transmission time of well under 5 seconds.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Comentarios a estos manuales

Sin comentarios

ADEMCO Alpha Vista Console Manual de instrucciones Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Alpha Vista Console