ADEMCO Alpha Vista Console Manual de instrucciones Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
Equipment Required
At the premises:
4140
At the central station (or the installer’s office/home):
.
A No. 699MD Intelligent Programmer that incorporates an intemd modem
and a No. 695–30XT Program Cartridge.
OR
.
An IBM PC compatible computer,
a Modem (check with Ademco Factory
Technical Support for the specific brand and model to be used), No.
4130PC Downloading Software Diskette,
and appropriate interconnecting
cables.
Remote Capabilities (See Note 2)
Programming:
N1 programming functions accessible from
the unit’s keypad or via local
No. 699 direct programming.
handing:
There are two types of commands that can be issued to the system:
1.
Control Ccmmands
To Arm the System in
To Disarm the System
,t!~ ‘way Mode’ (1)
To Bypass a Zone
TO Force the Systa to Accept a New Program Download
To Shut Down Caumunication
(dialer) Functions (non-payment of
monitoring fees in an owner’s system)
To Shut Down all Security System Functions (non–payment for a
leased system)
To Inhibit Local Keypad Programming (prevents takeover of your
accounts)
2. Status Commands -
To Cause the Systm to
the central station
To Read System Status:
Arming Status
Upload a Copy of its Resident Program to
Ready Status and Current Faults
Presence of Alarms (past or present)
Presence of Troubles (past or present)
AC Power Status
Bypass Status and Current Bypasses
* NOTES:
1. If the system is programmed for open/close reporting by user, User #7 will
be reported.
2.
After the 4140 and the 699 or PC have established valid communication, each
console will become inactive. The 4140 will resume the normal security
functions
(including responding to faults that took place during the
downloading) after it
is canmanded to hang up.
See the 4130PC or 695–
30XT instructions for details.
4
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 67 68

Comentarios a estos manuales

Sin comentarios