ADEMCO Alpha Vista Console Manual de instrucciones Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
9. At Subscriber #5890, Zone 12 assigned to channel 13 goes into alarm and
Zone 11 assigned to channel 11,
which has previously reported an alarm has
restored.
Subscriber
Identification
Message:
5890
10.
At Subscriber #0135 a test
Subscriber
Identification
Message:
0135
Channel Number
1234 56789
5553
51551
message is initiated.
Channel Number
1234
56789
5555 55559
FLJNCl?ION
ADDRESS
ALARM REPORT
*55
[1
COMMENTS: Enter O (Standard Report) or 1 (Expanded
Report).
When Expanded is selected, the channel number is
transmitted in the last position of the 2nd
transmission line (or of the 1st transmission line
if 4 + 2 Format is used).
NOTE :
Seiection applies to both primary and
secondary phone numbers.
RESTORE REPORT
BYPASS REPORT
*56
*57
[1
COMMENTS: Enter O (Standard Report) or 1 (Expanded
Report).
When a zone of protection alarm, bypass,trouble,
AC loss or luw battery report is transmitted, a
restore report for any of those conditions is not
issued unless ALL like conditions within a zone
are restored.
When Expanded is selected, the channel nunber is
transmitted in the last position of the 2nd
transmission line (of the 1st transmission line if
4 + 2 Format is used).
Restore reports for each
zone type alarm are individually selectable (see
Address numbers *69 through *71).
NOTE :
Selection applies
to both primary and
secondary
[1
COMMEITI’S:
Report).
Bypassing
a restore
phone numbers.
Enter O (Standard
a zone results in
Report) or 1 (Expanded
a bypass report and in
report when dl bypasses are removed.
. .
Fire and priority zones cannot be bypassed. When
Expanded is selected,
the channel is transmitted
in the last position of the 2nd transmission line
45
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

Comentarios a estos manuales

Sin comentarios