ADEMCO Alpha Vista Console Manual de instrucciones descargar pdf (Pagina 21)

With the metal clip in the vertical position,

mount the console by hooking

the spring behind the right edge of the opening so that it holds the

console against the inside of the wall, as shown at (A).

Now turn the

screw (frcm the front of the console). The clip will turn until it hits the

clip stop and will then draw the console forward (B). Continue turning the

screw until the console is flush against the wall then, making sure that

the console is straight.

tighten the screw further to secure the console

firmly in position.

DO NOT OVERTIGHTEN~

Insert the small nameplate supplied into the recessed opening to cover the

screw head at the front.of the console,

as prwiously shown in Diagram 4.

Ill

-STUDS

Ill

‘1

11:

Ill

1+,

WOTE:

A ROUGWIN nlNG 14133) MAYBE

?F!ESENT IN NEW CONSTRUCTION IF SO.

SIMPLY REMOVE COVER PLATE TO

EXPOSEFRAMEO S3PENINGSLHTASLE

FOR FLuEH MOUNTING OF THE CXX4SOLE.

Diagram 5. WALL PREPARATION FOR FLUSH MOUNTINGTHE CONSOLE

SHEETROCK

METAL CLIP

SPRING INOTE

ENDI

IF SHEETROCK IS TOO THICK,

BREAK OFF THE SCORED WING

NoTE :

+5/16’’(11 cm)H X 7.3//(20 cm) W

WALL OPENING IS REQuIRED FOR

FLUSH MOUNTING.

Diagram 6.

FLUSH MOUNTING THE 5137/4137/4147

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Sin comentarios

ADEMCO Alpha Vista Console Manual de instrucciones Pagina 21