ADEMCO Alpha Vista Console Manual de instrucciones descargar pdf (Pagina 11)

Secondary security codes are assigned by user #2 (with Master Code) as follows:

Master Code + CODE key + User # (03-15) + Secondary Code

The system will emit a single beep when each secondary code has been success-

fully entered.

Note:

When a secondary code is inadvertently repeated for different users,

or one user’s code is another’s duress code,

the lower user number

will take priority.

Individual secondary security codes can be deleted by user #2 (with Master Code)

as follows:

Master Code + CODE key + User # (03–15)”+ Master Code

Note: All security codes, master and secondary, permit

for arming, disarming, etc.

Secondary (Temporary) Security Codes:

access to the system

As stated prwiously, up to thirteen secondary codes can be assigned – to users

3 through 15.

The configuration in Application 1 shows that secondary (or

temporary) codes may be assigned by the primary user (user #2) to as many as

thirteen employees, each with a unique code. Note that user #3 can also assign

secondary codes to users 4-14 if required,

but in the typical arrangement shown

in Application 1, there may never be a practical need for this.

If so, the

primary user (#2) can elect to omit user #3 when assigning secondary codes.

In the configuration shown in Application 2, user #3, who is the primary user,

may need to assign secondary (temporary) codes to maids, cleaning persons, etc.

Since the system allows user #3 to assign secondary or temporary codes to as

many as elwen users (4-14), this need can be met. User #3 cannot assign (or

delete) user #15’s code, which is strictly under the control of user #2, who may

be the building manager or cwner in the configuration shown in Application 2.

See Table B, which illustrates the various levels of authority

security codes.

User #3 can assign secondary

User #3 Code + CODE key

User #3 can delete secondary

User #3 code + CODE key

(temporary) codes for users 4-I4 as

that exist for

follows:

+ User # (04-14) + Secondary Code

codes assigned to users 4–14 as follows:

+ User # (04-14) + User #3 Code

TAELE B. LEVELS OF AUTHORITY FOR SECURITY CODES

User

No.

#1 (Installer)

#4- #15

Can assign or delete

Secondary Code of User:

NONE

#3 through #15

#4 through #14

NONE

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Comentarios a estos manuales

Sin comentarios

ADEMCO Alpha Vista Console Manual de instrucciones Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Alpha Vista Console