ADEMCO 5130XM Manual de instrucciones descargar pdf (Pagina 96)

PROGRAMMING THE SYSTEM

ADDING

Up to 5 installer-defined words can be added to the bulk-In vocabulary. Each

CUSTOM WORDS

of the 5 “words’ can actually consist of several words, but bear in mind that a

maximum of 10 characters can be used for each word string. To create the

custom word or word string, proceed as follows:

1. Enter the programming mode.

2. Key ‘93. The foflowing will be displayed:

l ZN

3. Now key 00 to get into the mode which will allow the custom words to be

created. The foifowing will bs displayed:

ED ?

When in thii mode, the keys perform the foitowing functiins:

[3] Advances through alphabet in ascending order.

[1] Advances through alphabet in descending order.

[S] Selects the desired fetter, and moves the cursor to the right one

space.

[S] Moves the cursor one space to the left.

[7] inserts a space at the cursor location, erasing any character at that

location.

[6] Saves the new word in the system’s memory.

r] Returns to description entry mode.

4. Key the number of the custom word or word string to be created (O-4).

For example, if you are creating the first word (or word string), enter 0;

when creating the second word, enter 1, and so on. A cursor will now

appear at the beginning of the second line.

5. Use the [3] key to advance through the alphabet (numbers, symbols and

special characters are included). Use the [l] key to move back through

the alphabet.

IMPORTANT: Custom words must begin with an’aiphabetic character.

,-.

if numbers or symbols are used as the first character, the word will not be

saved.

6. When you have reached the desired character, press the [S] key to

select it. The cursor will then move to the right, in position for the next

character.

7. Repeat steps 5 and 6 to create the desired word (or words). Note that

the [S] key can be used to move the cursor to the left if neccessary, and

that key [7l can be used to enter a blank (or fo erase an existing

character). Each word or word string cannot exceed 10 characters.

Press the [S] key to save the custom word(s) and return to the

ED ?

display. The custom word (or string of words) will be automatically added

to the buitt-in vocabulary at the end of the group of words beginning with

the same fetter.

Repeat steps 4 through 8 to create up to 4 additional custom words (or

word strings).

10. Press the r] key to return to the ‘ZN ?? display, and follow the zone

description entry procedure to assign the new words to a zone

description.

11. Key ‘99 to exit the zone description programming mode.

.n.

ADEMCO’s VISTA XM SERIES TECHNICAL REFERENCE MANUAL

WWW.DIYALARMFORUM.COM

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 158 159

Comentarios a estos manuales

Sin comentarios

ADEMCO 5130XM Manual de instrucciones Pagina 96

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 5130XM