ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 96)

VISTA-128FBP/VISTA-250FBP Installation and Setup Guide

7-2

been selected at the station – otherwise Compass will

disconnect).

If Compass does not have an account already created,

and the panel is defaulted; the installer enters Code

#89, enters the unattended phone number, account

number, primary phone number, and then triggers the

unattended call. The panel calls and connects to

Compass; then Compass does an upload, and

disconnects (if this option has been selected at the

station – otherwise Compass will download the default

account data). A new account “??????-FFFF” will be

created.

For unattended download to work, the Receiver Group

and Primary Phone number have to be entered into

Compass.

The following items must be programmed for

unattended download:

• The account number (field ✳32)

• Primary central station telephone number (field

✳33)

• The download telephone number (field ✳35)

• Unattended Mode (enable in field ✳54.)

NOTE: The default for field ✳54 is enabled (1).

Installer Unattended Program Mode

The Installer Unattended Program Mode allows the

installer to program fields ✳32, ✳33, and ✳35 without

entering the normal program mode.

In response to the displayed menu selection, press 0

(NO) or 1 (YES). Pressing 0 displays the next choice in

sequence.

To access this mode, enter Installer Code + [#] + [89]. The following prompt appears:

PROMPT

EXPLANATION

Unattend. Phone

1 = YES 0 = NO 0

Press 1 to enter the unattended phone number.

Unattend. Phone 1

Enter the telephone number of the download software modem.

Enter up to 17 digits, 0-9; A key = ✳

✳✳

✳, B key = #, C key = 2-Sec. Pause. Do not fill unused spaces. Press the

✳ key to accept the phone number and exit.

Press the # key to exit without changing any data.

The system displays the Quit menu prompt. Press 1 to exit the Installer Unattended Program Mode, or 0 to

continue to the next prompt.

Unattended Acct#

1 = YES 0 = NO 0

Press 1 to enter the unattended account number.

Unattended Acct#

15-15-15-15

Enter a 3-or 4-digit (depending on report format) account number 00-09; B-F (11-15). Each number requires

a 2-digit entry so as to allow entry of hexadecimal digits (B-F). If a 3-digit account number is to be used,

enter digits in the first 3 locations, and enter 00 in the last location.

Press the ✳ to exit without changing any data.

The system displays the Quit menu prompt. Press 1 to exit, or 0 to continue.

Primary Phone

1 = YES 0 = NO 0

Press 1 to enter the primary phone number.

Primary Phone 0

Enter the primary central station telephone number.

Enter up to 17 digits, 0-9; A key = ✳, B key = #, C key = 2-Sec. Pause. Do not fill unused spaces. Press the

D key accept the phone number and exit.

Press the ✳ to exit without changing any data.

The system displays the Quit menu prompt. Press 1 to exit, or 0 to continue.

Quit ?

1 = YES 0 = NO 0

Enter 1 to quit the Installer Unattended Program Mode. Enter 0 at the “Quit ?” prompt to return to the first

menu prompt, “UNATTEND. PHONE”.

Trig. Unattended

1 = YES 0 = NO 0

Enter 1 to initiate the unattended download at this time. Otherwise enter 0.

NOTE: The ADEMCO Compass Downloader must be in Unattended Mode.

An unattended download may be initiated by the installer or end user at any time by entering User Code + [#] + [1].

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 135 136

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 96

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP