ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 22)

VISTA-128FBP/VISTA-250FBP Installation and Setup Guide

2-4

The following is a typical display:

S Y S T E M 1 2 3 4 5 6 7 8

S T A T U S R R N N A ✴ B

Possible status indications include:

A = Armed Away S = Armed Stay M = Armed Maximum C = Comm Fail

I = Armed Instant R = Ready N = Not Ready

B = Bypassed/Ready ✴ = Alarm T = Trouble

F = Fire Alarm P = AC Power Failure L = Low System Battery

To obtain more information regarding a particular partition, enter [✴] + Partition No. (e.g., [✴] + [4]). This allows

viewing only of that partition. In order to affect that partition, the user must use a code that has access to that

partition. Also, in order for a user of any partition to log on to Partition 9 to view the status of all partitions, that user

must have access to all partitions. Otherwise, access is denied.

The following is displayed for a fault condition on Zone 2 (Loading Dock Window) on Partition 1 (Warehouse) when a

user logs on from a keypad on Partition 9:

WHSE DISARMED

HIT ✴ FOR FAULTS

Pressing [✴] causes the following display to appear at Partition 1's keypad(s):

FAULT 002 LOADING

DOCK WINDOW

Additional zone faults are displayed one at a time. To display a new partition's status, press [✴] + Partition No.

The Armed LED on a Master keypad is lit only if all partitions have been armed successfully. The Ready LED is lit only

if all partitions are "ready to arm." Neither LED is lit if only some partitions are armed and/or only some partitions are

ready.

Press [✴] + [0] or [✴] + [9] to return to the master partition. Otherwise, if no keys are pressed for 2 minutes, the system

automatically returns to the master partition

The sounder on a Master keypad reflects the sound of the most critical condition on all of the partitions. The priority of

the sounds, from most to least critical, is as follows:

1. Pulsing fire alarm sounds

2. Steady burglar alarm sounds

3. Trouble sounds (rapid beeping)

Silence the sounder by pressing any key on the Master keypad or a keypad on the partition where the condition exists.

A Master keypad uses the same panics as Partition 1. Master keypad panics are sent to Partition 1, and will activate

on Partition 1. Therefore, panics must be programmed for Partition 1.

Priority of Displays for Multi-Partition

This table shows the priority of displays if more than one of these conditions exists at the same time.

Priority Description Display Priority Description Display

1 Fire Alarm F 8 Not Ready N

2 All Other Alarms

✴

9 Ready R

3 AC Loss P 10 Armed STAY S

4 Comm Fail C 11 Armed AWAY A

5 System Low Battery L 12 Armed INSTANT I

6 Trouble T 13 Armed MAXIMUM M

7 Bypass B

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 135 136

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP