ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 98)

– 98 –

Open/Close Schedule Each partition can be assigned one daily open/close schedule, plus a holiday

open/close schedule. Temporary schedules are programmed separately, using

the #81 Temporary Schedule Menu Mode. To program additional open/close

schedules, see the Time Driven Events section.

After entering Scheduling Menu Mode, press 0 until the O/C Schedules prompt

appears.

O/C Schedules ?

1 Yes 0 = No 0

Enter 1 to program opening and closing schedules.

Partition # ?

01-08, 00 = Quit 01

Enter the appropriate partition number to which the

following open/close schedules will apply.

Enter 00 then * at the "PARTITION #" prompt to quit O/C

Schedules programming and display the Quit ? prompt.

Enter 0 at the Quit ? prompt to

return to the main menu choices

and continue programming. Enter

1 to quit Scheduling Menu Mode.

Quit ?

1 = YES 0 = NO 0

Mon P1 OP WIND.?

00:00 00:00 00

For each day in which an opening or closing schedule is

desired, beginning with Monday, enter a time window

number (01-20) for the displayed day's opening

schedule. Enter 00 if no schedule is desired for a

particular day. As the number is keyed in, the actual time

that has been stored for that window will be displayed as

a programming aid. Press the * key to accept the entry.

Mon P1 CL WIND.?

00:00 00:00 00

Enter the time window number for the displayed day's

closing schedule. As the number is keyed in, the actual

time that has been stored for the window will be

displayed. Press the * key to accept the entry.

Tue P1 OP WIND.?

00:00 00:00 00

The console will now prompt for Tuesday's open/close

schedule, etc. Follow the procedure for Mondays

prompts. When the last day of the week has been

programmed, the holiday opening and closing window

prompts are displayed.

Hol P1 OP WIND.?

00:00 00:00 00

Enter the holiday opening time window number. Press

the * key to accept the entry.

Hol P1 CL WIND.?

00:00 00:00 00

Enter the holiday closing time window number. Press the

* key to accept the entry.

When the entries are completed, the PARTITION #

prompt is displayed again. Repeat this procedure for

each partition in the system.

When all partitions have been programmed, enter 00 at the PARTITION # prompt

to quit open/close schedules menus.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 131 132

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 98

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2