ADEMCO 4140XMPT2 Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
– 8 –
System Features The following table lists the special system features of the 4140XMPT2 system.
Global Arming Allows users to easily arm multiple partitions via console
prompts.
Polling Loop Built-in polling loop interface, with polling loop terminals
located on the panel's terminal block, allows expansion
up to 87 zones.
Glass Break Detector Supports up to 50 latching type 2-wire glass break
detectors on zone 8.
Quick Bypass Quick (forced) bypass feature bypasses all faulted
(Forced Bypass) zones with single key entry sequence.
Memory-Of-Alarm Memory-of-alarm feature, which, upon disarming the
system, automatically displays all zones that were in an
alarm condition while the system was armed.
Circuit Breakers Self resetting circuit breaker protection eliminates the
need to replace blown cartridge fuses.
Built-in Users Manual Built-in Users Manual (6139 only). By depressing and
holding any of the function keys on the console for 5
seconds, a brief explanation of that function scrolls
across the alpha-numeric display.
Descriptors All programmed descriptors can be displayed (one at a
time) by pressing and holding the READY key for 5
seconds, then releasing the key. This serves as a check
for installers to be sure all descriptors are entered
properly.
Cabinet Large cabinet with removable door for easier
installations.
Scheduling Scheduling feature allows installer and/or user to
automate system operation and/or turn on lights, etc.
Auto-arm/disarm of system.
Temporary schedules can be programmed by user.
System operation can be restricted to certain times.
Wireless Wireless support of 5700 or 5800 series transmitters
using 4280, 4281 or 5881 type receivers.
Event Logging Event Logging feature keeps record of all events, which
can be printed automatically or on demand.
Access Control Provides user activated access control command which
pulses a relay output for controlled opening of access
doors.
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 131 132

Comentarios a estos manuales

Sin comentarios