ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 116)

– 116 –

To display the events in a particular category, press [8] at the desired

category screen.

If in Display Mode, events will appear one at a time from the most recent to the

oldest. Press [8] again to display each subsequent event.

If in Print Mode, the first press of [8] will cause the printer to print all events in that

category, with each event automatically scrolled on the display console. The

following is a typical display:

P8 01/01 12:02AM

BURGLARY C03

Shows burglary alarm occurred in zone 3 of partition 8, at

12:02AM on January 1.

After the last event in the selected category has been displayed, the following will

appear for a few seconds:

END OF EVENT LOG

TYPE CCC UUU

The system will automatically return to the RECENT/COMPLETE selection

screen described earlier.

Clear Event Log To clear the Event Log, enter installer code + [#] + [6] + [2]

The following will appear:

CLEAR EVENT LOG

0=NO 1=YES

Press [1] if Event Log is to be cleared from memory. All events in the log will still

be displayed if the COMPLETE option is selected. Only those events occurring

from the time of the CLEAR command will be displayed if RECENT display option

is selected. Press [0] if event log is not to be cleared at this time.

If [1] is pressed, the following will appear:

ARE YOU SURE?

0=NO 1=YES

Press [1] if it is desired to clear the event log. Press [0] if event log is not to be

cleared.

Screen Definitions

RECENT Events since last CLEAR

COMPLETE Displays all events

TYPE Type of event (Burg., Fire, etc.)

CCC Zone (contact) number

UUU User number

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 131 132

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 116