ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 12)

– 12 –

SCHEDULING OVERVIEW

Major Features Of

Scheduling

Scheduling is an exciting new feature of the 4140XMPT2 and provides the

following functions.

Arm/Disarm control

Scheduling can be used to automate some of the system operation:

_ Auto arming and disarming at predetermined times.

_ Auto-arm warning

_ User option to delay auto arm

_ Provision for temporary schedule of up to one week

_ Provision for a holiday schedule

_ Limitation of arming and disarming to specific times

_ Control of when disarming will occur

Open/close by exception

Scheduling provides a means of reporting openings/closings by exception:

_ sends report only if action does not occur.

_ Inhibit opening/closing reports if within a Time Window

_ Send early to open/close reports if done earlier than window

• Send late to open/close reports if window is missed.

Relay Control (Time Driven Events)

Scheduling can also automatically perform relay driven actions at predetermined

times:

_ Can turn lights or other devices on/off at specific times

_ One shot action of light or other device

_ X-10 control for the automation of lights and appliances

Daylight Savings Time

_ Automatic time adjustment for daylight savings time

Scheduled events are programmed using a user friendly menu mode of

programming (#80 mode), explained in detail in the separate PROGRAMMING

GUIDE. This menu programming takes you step by step through the options.

The following overview will give you an understanding of the scheduling

concepts. Refer to the PROGRAMMING GUIDE for detailed programming

instructions.

Access Door Control The system also provides a means of access control. Entry of USER CODE + 0

will cause a momentary trigger of a pre-set output device. Each partition can have

its own output device. The trigger will occur on the device tied to the partition for

the console on which the keys were pressed. The access control relay is

programmed in partition-specific field 1*76.

Time-Driven Event

Programming

This very powerful feature allows arming, disarming, relay modules or X-10

devices to be activated automatically, based on the time windows described

previously. Time driven events can also be used to assign additional open/close

window schedules, so that more than one schedule per day can be programmed.

The system supports up to 20 time driven events. Refer to the PROGRAMMING

GUIDE–Scheduling Programming for more detailed information.

End User Scheduling

(#83 Menu Mode)

The system provides up to 20 "timers" available to the end user for the purpose

of activating output devices at preset times and on preset days. These timers are

analogous to the individual appliance timers that might be purchased at a

department store. The typical uses for this feature could be control of lights or

appliances , typically via X-10 modules. These modules are programmed into the

system by the installer during #93 Menu Mode–Device Programming. The end

user needs only to know the output device number (relay number) and its alpha

descriptor, both programmed by the installer via Relay Programming and Alpha

Programming respectively. To enter this mode, the user enters CODE + # + 83.

The installer may set certain relays to be "Restricted", since a system may have

some devices (Relays or X-10) which are not intended to be under the control of

end users, such as relays activating fire doors or relays activating certain

machinery. This option, set during #93 Menu Mode–Relay Programming, will

restrict operation by the end user.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 131 132

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2