ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 29)

– 29 –

EXAMPLES OF USES FOR RELAYS

The following table lists examples of some possible uses for relays. Refer to the Relay Programming

section of the PROGRAMMING GUIDE for detailed information.

LIST OF START

AND

STOP

CHOICES

A = Action 0=No Response; 1=Close for 2 seconds; 2=Close and stay closed; 3=Pulse on and off

EV = Event 0=Not used; 1=Alarm; 2=fault; 3=Trouble; 4=Restore

ZL = ZONE List 1 to 8 (from Field *81) or 0=Not Used. Upon restore of all zones on RESTORE of ZONE

LIST, relay action will STOP. It need not be same list as used for START

ZT = Zone Type/System Operation

Choices For Zone Types Are:

00 = No Response 06 = 24 Hr Silent

01 = Entry/Exit 07 = 24 Hr Audible

03 = Perimeter 08 = 24 Hr Aux

04 = Interior Follower 09 = Fire

05 = Trouble Day/Alarm Night 10 = Interior w/Delay

Choices For System Operation:

20 = Arming-Stay 39 = Fire Zone Trouble

21 = Arming-Away 40 = Bypassing

22 = Disarming 41 = AC Power Failure

31 = End of Exit Time 42 = System Battery Low

32 = Start of Entry Time 43 = Communication Failure

33 = Any Burglary Alarm 44 = RF Low Battery

34 = Code + # + 7 + 1 45 = Polling Loop Failure

35 = Code + # + 7 + 2 51 = RF Receiver Failure

36 = At Bell Timeout*** 52 = Kissoff

37 = 2 Times Bell Timeout*** 54 = Fire Zone Reset

38 = **Chime 58 = Duress

60 = Alarm Verification (use for both

START and STOP)

** Should be used to start 2-second close of relay only

***Or at Disarming, Whichever occurs earlier

Additional Stop Choices:

55 = Disarm + 1 Minute

56 = XX Minutes (Enter XX at 1*74)

57 = YY Seconds (Enter YY at 1*75)

START STOP

ACTION DESIRED A E V Z L Z T P Z L Z T P

TURN ON LIGHTS

On Entry:

Close relay at start of entry time and reset with key entry of

security code + # + 7+1 *

20032X034X

Close relay at start of entry time and reset after 1 minute 2 0 0 32 X 0 55 X

Close relay after any burglary alarm and reset with key

entry of security code + # + 7 + 2.**

20033X035X

**Can be used to turn on lights in the event of a burglary

alarm...(NOTE: Response types 06, 08, and 09 will not

activate relay).

Turn All Lights off with entry of security code + # + 7 + 2* 2 0 0 00 X 0 35 X

*Can be used to turn off all lights in on a given X-10 House

and Unit Id

Pulse light on trouble condition to attract attention_ 3 3 X 00 X 0 22 X

Pulse Light on alarm to attract attention_ 3 1 X 00 X 0 22 X

Use a PIR to turn a light on for a pre-set time period*_ 2 2 X 00 X 0 56 X

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 131 132

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2