ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 80)

– 80 –

COMMUNICATION PROGRAMMING GUIDE

Field # Low Speed Contact ID High Speed Express

*46, *48 Choose transmission No effect No effect No effect

speed and frequency

*52, *53 Send as either 4+2 No effect No effect No effect

or expanded

*79, *80 Enables alarm restores Enables alarm restores Enables alarm restores Enables alarm restores

*49 Add checksum digit No effect Add checksum digit No effect

*81, *82 Define codes and 1st digit enables report 1st digit enables report Define codes and

selects 4+1 or 4+2 if it is non-zero if it is non-zero selects 4+1 or 4+2

*54, *56, *59, Defines alarm event Enables reports Assigns reporting chnl Defines alarm event

*61, *64, *66, code for all reports from this code

*69, *71, *74, zone. Enables alarm

*76 reporting

*55, *57, *60 Defines code and No effect No effect Defines code and

*62, *65, *67, selects 4+1 or 4+2 selects 4+1 or 4+2

*70, *72, *75, *77

*58, *63, *68, Enables report and Enables report Enables report Enables report and

*73, *78 selects code. Note: Note: Alarm channel selects 1st digit of. the

No restores if must be programmed. 2-digit event code.

event not sent. (01-15) NOTE: No restores

if event not sent.

*50 Sescoa/Radionics; No effect No effect No effect

Selects fixed digit time

instead of fixed interdigit.

NOTES Note: Low Speed will

not send 3+2

messages. Zone ID

digit is suppressed.

Summary Of Default

Consequences

Loading communication defaults results in the following:

Low Speed

(*94*80)

• Selects low speed, standard format with no checksum, for both phone

numbers.

• Assigns the following report codes:

03 for zones 2-47

01 for zones 1 & 48-55 (fire zones)

02 for zones 62,63 (panic trans), & 95, 96, 99 (keypad panics)

09 for all alarm restores

• Enables all zone type restores.

ADEMCO Express

(*94*81)

• Selects Ademco express reporting format, with checksum, for both phone

numbers.

• Report codes for zones 1-87, 4280s and keypad panics are sent as their

respective zone ID numbers (01-87, 88-91, 95-99), Duress is sent as "DD".

Alarm restore is "E" + 2nd digit.

• Enables all zone type restores.

ADEMCO High Speed

(*94*82)

• Selects Ademco High Speed format, with no checksum, for both phone

numbers.

• Reporting is assigned to the following channels:

Channel 1 for zones 1 & 48-55 (Fire zones)

Channel 2 for zones 2-8

Channel 3 for zones 9-16

Channel 4 for zones 17-31

Channel 5 for zones 32-47 (RF interior zones)

Channel 6 for zones 56-61 & 87

Channel 9 for zones 62 & 63 (panic transmitter)

Channel 7 for 2nd 4280 (88 & 89) & polling loop short (97)

Channel 8 for first 4280 (90 & 91)

Channels 10, 11 & 12 for keypad panics 95, 96 & 99 respectively

• Enables all zone type restores.

• Enables Duress to be sent.

ADEMCO's Contact ID

(*94*83)

• Selects Contact ID format for both phone numbers.

• Reporting is enabled for all zones.

• Enables all zone type restores.

• Refer to the SYSTEM COMMUNICATION section for event code definitions.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 131 132

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 80

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2