ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 90)

– 90 –

When programmed, employees can arm and disarm the system within the open

and close time windows respectively without causing as report to be sent to the

central station (reporting by exception). At the end of these windows, the system

will automatically arm/disarm if an employee fails to arm/disarm manually (auto

arm/auto disarm).

Time windows can also be used to program time driven relay output or X-10

device events. Time driven events can be activated at different times within a

window as follows:

_ At the beginning of a time window

_ At the end of a time window

_ During a time window active period only (On at beginning of window, off at

end)

_ At both the beginning and end of the time window (Ex: to sound a buzzer at

the beginning and end of a coffee break)

Important: Since the time windows are shared among all partitions, it is

important to make sure that changing a time window does not adversely affect

desired actions in other partitions.

Limitation of access by Time A user's access can be limited to a certain time period, during which he can

perform system functions. Outside this time though, that user's code will be

inactive. The system provides up to 8 Access Schedules, each of which consists

of two Time Windows (one for opening, one for closing) for each day of the week

and two time windows for holidays. The access schedules are programmed via

#80 Menu Mode, and enabled for a given user when that user is added to the

system.

Open/Close Schedules The Open/Close scheduling is controlled by one of three individual schedules.

Each schedule consists of one time window for openings and one time window

for closings. There are three types of schedules available:

Temporary schedule The temporary schedule provides a method for the end

user to override the daily and holiday schedules. It

consists of one opening window and one closing

window for each day of the week. The schedule

automatically takes effect for up to one week, after

which it is deactivated. This schedule is programmed

using the #81 Temporary Schedule Menu Mode. Refer

to that section for procedures.

Holiday schedule A holiday schedule will override the regular daily

schedule on selected holidays throughout the year.

Daily schedule Each partition can have one daily schedule consisting of

one opening window and one closing window per day.

Additional Schedules: Additional opening and closing schedules can be

programmed using the time-driven event programming options. For example,

a schedule for normal store opening/closing can be programmed with open/close

schedules, and another open/close schedule for beginning and ending lunch

hour can be programmed using the time driven event schedule programming.

Refer to the Time Driven Events paragraph later in this section, and the Time

Driven Events section in the PROGRAMMING GUIDE for detailed information.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 131 132

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 90

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2