ADEMCO 4140XMPT2 Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
56
Downloader Options *35 Download Phone No.
This field is applicable only if downloading will be utilized. Enter the
downloading phone number, up to 12 digits (0-9). Do not fill unused
spaces.
* 3 6 Download ID No.
Enter 00-09; A-F (10-15). Only applicable if downloading will be utilized.
Make entries as 2-digit numbers as follows:
00=0 03=3 06=6 09=9 12=C 15=F
01=1 04=4 07=7 10=A 13=D
02=2 05=5 08=8 11=B 14=E
* 3 7 Download Command Enables
Each of the various remote (from the central station) functions can either be
enabled or disabled. Disabling a function means that the central station will
not be able to perform that function with respect to this system. Enter 1 to
enable a function, and 0 to disable a function. See field 1*53 for Callback
disable option. For UL installations, all entries must be 0.
2nd page field
1*53 Download Callback
Enter 1 if callback is not required when downloading. Enter 0 if callback is
required. Must be 0 for UL.
Dialer Options *30 Touch-Tone Or Rotary Dial
Enter 1 if touchtone service is being used. Enter 0 if rotary phone service
is used.
IMPORTANT!: Do not select a dialing method that is not legally permitted
by the telephone company for the particular subscriber. If selecting touch-
tone, make sure the subscriber has requested and is paying for touch-tone
service. Note that whether or not touch-tone dialing for call placement is
permitted, communication by the use of DTMF signaling (Ademco High
Speed) will still take place. See field 1*33 for Touch-Tone w/Rotary backup.
* 3 1 PABX Access Code
This field is used to enter up to four 2-digit numbers 00-09; B-F (11-15). If
not required, enter nothing and proceed to next address; otherwise, enter
prefix needed to obtain an outside Telco line. This field may be used
alternatively to enter a prefix that can suppress the Telco's call waiting
feature from interfering with outgoing transmissions. This prefix is only
useful if the Telco option to suppress call waiting has been obtained by
your customer. The prefix to be used is 01010700 if rotary dialing is being
used or 140700 if touch-tone dialing is being used. Each entry is a 2-digit
entry so as to allow use of hexadecimal digits (B-F). Do not use hexadecimal
digit A. Only enter digits required. Do not fill unused spaces.
*33 Primary Phone Number
This field is used to enter the primary phone number, up to 12 digits, 0-9.
This is the phone number the control will use to transmit alarm and status
messages to the central station. Do not fill unused spaces. Note that back-
up reporting (8 calls are made to the secondary phone number if no
acknowledgment is received after 8 attempts to the primary number) is
automatic only if a secondary phone number is entered.
*34 Secondary Phone Number
This field is used to enter the secondary phone number, up to 12 digits, 0-
9. The secondary phone is the number that the control will use if
communication on the primary number is unsuccessful. Do not fill unused
spaces. If this field is programmed, a secondary subscriber account number
(field *90) must also be programmed (can be the same as the primary
account number).
* 4 0 Open/Close Reporting For Keyswitch
Enter 1 if open/close reporting for the keyswitch is desired. Enter 0 if
reporting is not desired.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 131 132

Comentarios a estos manuales

Sin comentarios