ADEMCO 4140XMPT2 Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
The following table lists the sDecial system features of the 4140XMPT2 svstem.
Global
Arming
Polling Loop
Glass Break Detectol
Quick Bypass
(Forced 6ypaSS)
Memory-Of-Alarm
Circuit Breakers
Built-in Users Manua
Descriptors
Cabinet
Scheduling
Wireless
Event Logging
Access Control
Allows users to easily arm multiple partitions via console
DromDts.
Built-in polling loop interface, with polling loop terminals
located on the panel’s terminal block, allows expansion
up to 87 zones.
Supports up to 50 latching type 2-wire glass break
detectors on zone 8.
Quick (forced) bypass feature bypasses ail faulted
zones with single key entry sequence.
Memory-of-alarm feature, which, upon disarming the
system, automatically displays all zones that were in an
alarm condition while the system was armed.
Self resetting cirwit breaker protection eliminates the
need to replace blown cartridge fuses.
Built-in Users Manual (5137 AD/6139 onlv). Bv
depressing and holding any”of the function keys-on th~
console for 5 seconds, a brief explanation of that
function scrolls across the alpha-numeric display.
All programmed descriptors can be displayed (one at a
time) by pressing and holding the READY key for 5
seconds, then releasing the key. This serves as a check
for installers to be sure all descriptors are entered
properly.
Large cabinet with removable door for easier
installations.
Scheduling feature allows installer and/or user to
automate system operation and/or turn on lights, etc.
Auto-arm/disarm of system.
Tempora~ schedules can be programmed by user.
System operation can be restricted to cerlain times.
Wireless suppoti of 5700 or 5800 series transmitters
using 4280, 4281 or 5881 type receivers.
Event Logging feature keeps record of all events, which
can be printed automatically or on demand.
Provides user activated access control command which
pulses a relay output for controlled opening of access
doors.
-4
-6-
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Comentarios a estos manuales

Sin comentarios