ADEMCO 4140XMPT2 Manual de usuario descargar pdf (Pagina 41)

[ Part. 2- SHOP ? [

Press O(NO) or 1 (YES), depending on whether or

To CHAHGE a Master,

Manager or Operator

code

To Delete a Master,

Manager or Operator

code

To EXIT The User Code

Entry Mode

.—...— -.. —..

10= NO, I= YES

not this “user will ‘have atiess to- the dispiayed

partition number. If NO, the console displays this

prompt for the nexl partition number in sequence.

If YES, the console prompts for the following:

● User’s authority level in the displayed partition (see

Authority Level prompt above). Note that the user

number in the displayed partition is automatically

assigned.

● Open/Close option for this user in the displayed

partition (see Open/Close prompt above).

● Global Arm option for this user in the displayed

partition.

When all partitions have been displayed, the console

will scroll through all partitions to which access has

been assigned, and will display the user number,

authority level, open/close and global arm options

that were programmed for each partition the user was

granted access. For example:

Note that the ‘G” following the authority level

ind”cates that the global arm feature is enabled for

this user in the displayed partition, and that the

period at the end of the second line indicates

open/close reporting is enabled for this user in the

displayed partition. The “S” idicates the parlition from

which the user may be changed or deleted.

Enter Installer code* + [8]+ User number (00-99) + new code for that user.

The system will detect that the user number is already assigned and will prompt if

this is a new user. Press O(NO).

The system will then confirm that the change is allowed based on authorization

level. If the user number is the same as the Installer’s, the system will prompt for

the new code to be reentered. This prevents accidentally changing a high level

code.

● Or Master or Manager code, but must be code with higher level of authority than

the code being changed. (i.e. Master code can change a Manager or Operator

level code, but cannot change another Master code; a Manager code can change

an Operator level code, but cannot change a Master or another Manager code).

Enter Installer code* + [8]+ User number (00-99) + Installer code

The system will prompt if this code should be deleted. Press O(NO) or 1 (YES).

If yes, that user’s code will be removed from all partitions to which it had been

assigned, and all authorization levels and other information about that user will be

deleted. Note that a user can only be deleted from the partition in which it was first

assigned, and can only be deleted by a user with a higher authority level. A user

cannot delete himself.

● Or Master or Manager code, but must be code with higher level of authority than

the code being deleted. (i.e. Master code can delete a Manager or Operator level

code, but cannot delete another Master code; a Manager code can delete an

Operator level code, but cannot delete a Master or another Manager code).

Press either [Q] or [#], or don’t press any key for 10 seconds.

-41-

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Comentarios a estos manuales

Sin comentarios

ADEMCO 4140XMPT2 Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4140XMPT2