ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 67)

— 67 —

Automatic Refresh: The system automatically updates the status of all Time-Driven Events upon any of the following

occurrences:

• Changing of the time or date via #63 mode

• Exiting #80 Scheduling Menu mode

• Exiting Program mode

• After a disconnect from the downloader

• On a power-up

• At Daylight Saving Time adjustment.

Below is a list of the "Action" codes (desired actions) used when programming time-driven events. Note that these codes are

independent of the "relay codes" programmed during the #93 Menu Mode–Output Programming mode. If using Time Driven

Events, the following menu items must first be programmed using #93 Menu Mode - Output Programming:

Enter Relay No. (reference identification number)

Relay Group (if applicable)

Restriction

Relay Type (V-Plex or 4204/4204CF)

Zone No. (V-Plex)

ECP Address (4204/4204CF)

Relay No. (4204/4204CF)

Relay commands:

Action Specifier for commands 01-05 is Relay No.; Action Specifier for commands 06-10 is Relay Group No.

01 = Relay On 02 = Relay Off

03 = Relay Close for 2 seconds 04 = Relay Close XX minutes (field 1*74)

05 = Relay Close YY seconds (field 1*75) 06 = Relay Group On

07 = Relay Group Off 08 = Relay Group Close for 2 seconds

09 = Relay Group Close XX minutes (field 1*74) 10 = Relay Group Close YY seconds (field 1*75)

Arm/Disarm commands:

Action Specifier for commands 20-24 is Partition(s). Activation times 1 (Beginning), 2 (End), 3 (During), 5 (Random Start), 6

(Random End), 7 (Random During) are the only valid choices for auto-arming and disarming functions.

20 = Arm-Stay 21 = Arm Away

22 = Disarm 23 = Force Arm Stay (Auto-bypass faulted zns)

24 = Force Arm Away (Auto-bypass faulted zns) 25 = Arm Instant

26 = Arm Maximum

Bypass commands:

Action Specifier for commands 30-31 is Zone List #, Activation times 1 (Beginning), 2 (End), 3 (During), 5 (Random Start), 6

(Random End), 7 (Random During) are the only valid choices for bypass commands.

30 = Auto bypass - Zone list 31 = Auto unbypass - Zone list

Open/Close Windows:

Action Specifier for commands 40-41 is Partition(s), for 42 is Access Group and for 50 no specifier is programmed.

Activation time 3 (During), 7 (Random During) are the only valid choices for these commands.

40 = Enable Opening Window 41 = Enable Closing Window 42 = Enable Access Window

50 = Off-Normal Reminder (Starts local keypad beeping if off-normal condition exists)

Additional Commands

Action Specifier for command 78 is Group.

78 = Access Point Group Disable

1 2 ... 62 63 64 65 66 67 68 69 70 71 72

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 67

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP