ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 13)

– 13 –

3*13 FIRE SUPERVISORY RESPONSE TO OPEN/SHORT

(Applies to Zone Type 18) [0]

0=Trouble on open/Supervisory on short

1=Supervisory on open/Supervisory on short

NOTE: Must be set to “0” for Commercial Fire Installations.

3*14 WATERFLOW SILENCE OPTION [0]

0=silence on code = off; 1=silence when waterflow restores

NOTE: Must be set to “0” for Commercial Fire Installations.

3*16

DELAY FOR ZONE TYPE 17 & 18 [00] |

Enter 00-15 times 2 seconds

Delay cannot exceed 90 seconds in UL installations.

NOTE: Must be "00" for Commercial Fire installations.

3*17 ALTERNATE FUNCTION (TAMPER) [0]

FOR ZONE 6 0=disable; 1=enable

3*18 EXTENDED DELAY FOR TYPES 17 & 18 [0]

0=disable; 1=enable

NOTE: Must be "0" for Commercial Fire installations.

3*19 AUX INPUT ALTERNATE FUNC ENABLE [0]

0=pins 5 and 9 function as per filed 3*20;

1=pins 5 and 9 function as RXD and DTR

NOTE: Must be set to “0” for Commercial Fire Installations.

3*20 TRIGGER OUTPUT SELECTION [0]

0=Communicator full connection & remote console sounder;

1=Communicator limited connection and keyswitch LEDs

2=Communicator fire only connection and 5140LED

NOTE: Must be set to “0” for Commercial Fire Installations.

3*21 MAX NUMBER OF DIALER ATTEMPTS [8]

1-8 (3, 4 or 5 for NFPA72 compliant systems when a

secondary phone number is programmed (field *34))

3*30 DIALER SELECTION [1,0]

0=disable; 1=enable Main Backup

NOTE: If 3*30 is disabled (0, 0), the panel does not report at

all via Communicator.

3*31 BACKUP DIALER TOUCHTONE/ROTARY [1]

1=TouchTone; 0=Rotary

3*50 ZONE TYPE RESTORE ENABLES

FOR ZONE TYPES 16-18

1=enable; [0=disable]

Restores must be set to “1” for Commercial Fire installs.

3*55 RESET ON SECOND OFF FOR BELL 1 [0]

0=disable; 1=enable

NOTE: Must be set to “0” for Commercial Fire Installations.

3*56 RESET ON SECOND OFF FOR BELL 2 [0]

0=disable; 1=enable

NOTE: Must be set to “0” for Commercial Fire Installations.

3*57 BELL 2 & AUX RELAY CONFIRM [0,0]

ARMING DING Bell 2 Aux

0=disable; 1=enable.

NOTE: If using a keyfob, when the button is pressed, either

for arming or disarming, the bell will ding indicating that the

button is working.

Must be “1” for Commercial Burglary installations.

3*59 ENABLE BELL 2 & AUX RELAY [0,0]

CHIME ANNUNCIATION Bell 2 Aux

0=disable; 1=enable

NOTE: Must be “0, 0” if Bell 2 or Aux. Relay is used for fire

application.

3*60 BELL 2 & AUX RELAY TIMEOUT | |

Bell 2 Aux

Enter 00-15 times 2 minutes; 00=no timeout [00,00]

Minimum 16 minutes for Commercial Burglary installations.

3*61 AUX RELAY FUNCTION [1]

0=trouble/supervisory; 1=alarm, silenced by code = off;

2=smoke detector reset; 3=battery save; 4=alarm, silenced

by code = # = 67

NOTE: See Data Field Descriptions in the Installation and

Setup Guide for specific information.

3*82 ENABLE BURG FEATURES ON PART 1 [1]

0=disable (disables AWAY, STAY, MAX, TEST, INSTANT

and CHIME); 1=enable;

NOTE: Must be "0" for Commercial Fire installations.

3*85 ENABLE FIRE & SYSTEM ZONE BYPASS [1]

0=disable; 1=only installer can bypass;

2=only installer and master can bypass.

Applies to fire zone types 9, 16, 17, and 18 and system

zones 970-977 and to partition 1 only.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP