ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 12)

– 12 –

1*76 CONTROL RELAY [00] |

Relay will be pulsed for 2 seconds whenever code + [0] is

pressed. Enter relay number 01-96; 00=none.

Must be "00" for Commercial Burglary and Commercial Fire

installations.

1*77 LOG FIRST MAINTENANCE SIGNAL [0]

0=No Log; 1=Log first maintenance signal from each smoke

detector.

1*78 EXTENDED HOME CONT EVENTS [0]

Not Used. Must Be Set To “0”.

0=Limited home control command set (32 commands).

1=Extended home control command set (255 commands).

1*79 HOME CONTROL EVENTS

[0 0 0 0 0 0]

Alarm

Trbl

Byp

O/C

Syst

Test

Not Used. Must Be Set To “0” In Each Entry.

1=enable; 0=disable. Select the type of events (status

reports) transmitted via the RS232 output.

3rd Page Programming Fields (press *94)

2*00

NUMBER OF PARTITIONS [1]

Enter 1-8

2*01 DAYLIGHT SAVING TIME [03, 11] | |

START/END MONTH Start End

00-12; if no daylight saving time, enter 00,00

2*02 DAYLIGHT SAVING TIME [2, 1] |

START/END WEEKEND Start | End

Enter 1-7. 1=first; 2=second; 3=third; 4=fourth; 5=last; 6=next

to last; 7=3rd from last [1,5]

2*05 AUTO-ARM DELAY [15] |

Enter the time between the end of the arming window and the

start of auto-arming warning period, in values of 1-14 times 4

minutes 00=instant; [15=no auto arm at all]. When this delay

expires, the Auto-Arm Warning Period begins.

2*06 AUTO-ARM WARNING PERIOD [15] |

This is the time during which the user is warned to exit the

premises prior to the auto-arming of the system (beeps every

15 seconds; "ALERT" displayed). Enter 01-15 minutes.

00=instant at end of arming delay.

2*07 AUTO-DISARM DELAY [15] |

This is the time between the end of the disarming window

and the start of auto-disarming. Enter 01-14 times 4 minutes;

00=instant at end of window; 15=no auto-disarm.

2*08 ENABLE FORCE ARM FOR AUTO-ARM [0]

0=disable; 1=enable

2*09 OPEN/CLOSE REPORTS BY EXCEPTION [0]

1=enable; 0=disable

If enabled, only openings and closings occurring outside the

scheduled opening/closing windows will trigger dialer reports.

Opening reports will also be suppressed during the closing

window, in order to prevent false reports when the user arms

the system and then reenters the premises to retrieve a

forgotten item.

2*10 ALLOW DISARMING ONLY DURING [0]

ARMING/DISARMING WINDOWS

0=disable; 1=enable

See system-wide field 2*11 if enabling field 2*10. This

feature adds high security to the installation.

2*11 ALLOW DISARM OUTSIDE WINDOW [0]

IF ALARM OCCURS

Used only if field 2*10 is set to "1." If this field is enabled ("1")

the system can be disarmed outside the disarm window if an

alarm has occurred. If "0," disarming can only be done during

the disarm window. If field 2*10 is set to "0" for a partition,

this field has no effect for that partition.

2*18 ENABLE GOTO FOR THIS PARTITION [0]

1=Allow log-on from other partitions; 0=disable

NOTE: Must be disabled for partition 1 in Commercial Fire

installations.

2*19 USE PARTITION DESCRIPTORS [0]

0=disable; 1=enable

2*20 ENABLE J2 TRIGGERS FOR PARTITION [1]

0=disable; 1=enable for displayed partition

2*21 ENABLE SUPERVISION PULSES FOR COMM -

Not Used. Must Be Set To “00000”.

00000]

Used only for supervised connection to Communicators (e.g.

7845i-ent).

Enter 0 to disable or 1 to enable the listed outputs.

F= Fire; B= Burglary/Audible Panic; P= Silent Panic/Duress;

S= Supervisory; T= Trouble.

2*22 DISPLAY FIRE ALARMS OF [0]

OTHER PARTITIONS

0=disable; 1=enable.

Must be set to “0” (disable) for partition 1.

2*23 DISPLAY BURG, PANIC and CO [0]

ALARMS OF OTHER PARTITIONS

0=disable; 1=enable.

Must be set to “0” (disable) for partition 1.

2*24 DISPLAY TROUBLES OF OTHER [0]

PARTITIONS

0=disable; 1=enable

Must be set to “0” (disable) for partition 1.

2*30 through 2*88 (PAGER OPTIONS) - Not Used.

4th Page Programming Fields (press *94)

3*00

DISPLAY TRBL INSTEAD OF CHECK [0]

0=CHECK; 1=TRBL

3*01 EVENTS DISPLAY LOCK [1]

0=scroll all alarms; 1=lock display of first fire alarm

NOTE: Must be set to “1” for Commercial Fire Installations.

3*12 ZN TYPE 18 DELAY USE [1]

0=disable; 1=enable

NOTE: Must be set to “0” for Commercial Fire Installations.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP