ADEMCO VISTA-250FBP Guia de preparacion descargar pdf (Pagina 15)

– 15 –

1*45 EXIT DELAY SOUNDING [1]

1=enable; 0=disable Produces quick beeping during exit

delay if enabled.

NOTES:

Must be set to “0” in partition 1 for fire systems.

Must be enabled “1” for SIA installations.

See page 32, “SOUND OPTION”, prompt for disabling the

entry/exit beeps on individual

1*47 CHIME ON BELL 1 [0]

1=enable; 0=disable

1*52 SEND CANCEL IF CODE + OFF [1]

1=no restriction; 0=within Bell Timeout period only.

Must be enabled “1” for SIA installations.

1*76 CONTROL RELAY FOR PART. [00] |

Relay will be pulsed for 2 seconds whenever code + [0] is

pressed. Enter 00-96; 00=none.

Must be "00" for Commercial Burglary and Commercial Fire

installations.

3rd Page Fields

2*05 AUTO-ARM DELAY [15] |

Enter the time between the end of the arming window and

the start of auto-arming warning period, in values of 1-14

times 4 minutes 00=instant; [15=no auto arm at all]. When

this delay expires, the Auto-Arm Warning Period begins.

2*06 AUTO-ARM WARNING PERIOD [15] |

This is the time during which the user is warned to exit the

premises prior to the auto-arming of the system (beeps every

15 seconds; "ALERT" displayed). Enter 01-15 minutes.

00=instant at end of arming delay.

2*07 AUTO-DISARM DELAY [15] |

This is the time between the end of the disarming window

and the start of auto-disarming. Enter 01-14 times 4 minutes;

00=instant at end of window; 15=no auto-disarm

2*08 ENABLE FORCE ARM FOR AUTO-ARM [0]

0=disable; 1=enable

2*09 OPEN/CLOSE REPORTS BY EXCEPTION [0]

1=enable; 0=disable. If enabled only openings and closings

occurring outside the scheduled opening/closing windows

trigger dialer reports. Opening reports will also be

suppressed during the closing window, in order to prevent

false reports when the user arms the system and then re-

enters the premises to retrieve a forgotten item.

2*10 ALLOW DISARMING ONLY DURING [0]

ARMING/DISARMING

WINDOWS

See system-wide field 2*11 if enabling field 2*10. This

feature adds high security to the installation.

0=disable; 1=enable

2*18 ENABLE GOTO FOR THIS PARTITION [0]

1=Allow log-on from other partitions; 0=disable

NOTE: Must be disabled (0) for partition 1 in Commercial

Fire installations.

2*20 ENABLE J2 TRIGGERS BY PARTITION [1]

0=disable for displayed partition; 1=enable for displayed

partition

2*22 DISPLAY FIRE ALARMS OF [0]

OTHER PARTITIONS

0=disable; 1=enable

Must be set to “0” (disable) for partition 1.

2*23 DISPLAY BURG, PANIC AND CO ALARMS [0]

OF OTHER PARTITIONS

0=disable; 1=enable

Must be set to “0” (disable) for partition 1.

2*24 DISPLAY TROUBLES OF OTHER [0]

PARTITIONS

0=disable; 1=enable

Must be set to “0” (disable) for partition 1.

4th Page Fields

3*57 BELL 2 & AUX RELAY CONFIRM [0,0]

ARMING DING Bell 2 Aux

0=disable; 1=enable.

NOTE: If using a keyfob, when the button is pressed, either

for arming or disarming, the bell will ding indicating that the

button is working.

Must be set to “1” for Commercial Burglary installations.

3*59 ENABLE BELL 2 & AUX RELAY [0, 0]

CHIME ANNUNCIATION Bell 2 Aux

0=disable; 1=enable

NOTE: Must be “0, 0” if Bell 2 or Aux. Relay is used for fire

application.

3*60 BELL 2 & AUX RELAY TIMEOUT | |

Bell 2 Aux

Enter 00-15 times 2 minutes; 00=no timeout [00, 00]

Minimum 16 minutes for Commercial Burglary installations.

SUMMARY OF PROGRAMMING COMMANDS

•

To enter program mode, enter installer code + [8] + [0] + [0] +

[0]

• To set standard defaults, press *97

• To change to next page of program fields, press *94

• To return to previous set of fields, press *99

• To erase account and phone number field entries, press [*] +

field number + [*]

• To assign zone descriptors, press #93 + follow menu prompts

• To add custom words, press #93 + follow menu prompts

• To enter Installer's Message, press #93 + follow menu prompts

• To exit program mode, enter *99 OR *98: *99 allows re-access

to programming mode by installer code. *98 prevents re-access

to programming mode by installer code.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guia de preparacion Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP