ADEMCO Security System VISTA-15 Especificaciones Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
START SMTWTFS
HH MMAM
0010000
Start Time
01-12 = hour
00-59 = minute
0 = AM; 1 = PM
Days = place “1” under days
[
] to continue
Enter the events start time and days of the week to occur.
To select days, position the cursor under the desired days using the
[] key to move forward, then press 1” to select the day.
START SMTWTFS
HH MMAM
0010000
Stop Time
01-12 = hour
00-59 = minute
0 = AM; 1 = PM
Days = place “1” under days
[
] to continue
Enter the events stop time and days of the week to occur.
To select days, position the cursor under the desired days using the
[] key to move forward, then press 1” to select the day.
This entry applies only to the following events:
1 (relay on/off)
2 (user access)
3 (latch key report)
REPEAT OPTION
0-4 X
Repeat Option
0 = do not repeat
1 = repeat schedule weekly
2 = repeat schedule biweekly
(every other week)
3 = repeat schedule every third
week
4 = repeat schedule every
fourth week
[
] to continue
Enter the desired repeat option for this schedule.
e.g., To make a schedule that happens everyday you would select all
days with a repeat count of 1. To make a schedule that runs for one
week then stops, select everyday with a repeat count of 0.
RANDOMIZE
0=NO 1=YES X
Randomize
0 = no
1 = yes
[
] to continue
If selected, the scheduled start and stop times will vary within 60
minutes of the hour time. For example, if a schedule is set to start
at 6:15pm, it will do so the first time 6:15pm arrives, but on
subsequent days it will start anytime between 6:00 and 6:59 p.m.
NOTE:
Do not use the random option if the start and stop times are
within the same hour setting, otherwise unpredictable results may
occur (e.g., the randomized stop time may occur before the start time).
Installation Instructions
10-2
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 87 88

Comentarios a estos manuales

Sin comentarios