ADEMCO Accord Manual de instalación descargar pdf (Pagina 60)

High Security Mode (6128RFH only)

For programming secure fobs onto the Accord xpC: (required for DD243)

1. Learn the fob onto the 6128RFH keypad first as follows:

(1) With the panel in programming mode, enter the keypad programming mode

by opening and closing the keypad tamper and pressing 1 & 2

simultaneously. The display should alternate between 00 and --.

(2) Press 0 (High Security mode) and the display will show En.

(3) Press 1 to enable the High Security mode (0 is disabled) then Ø to continue.

(4) Press 8 to select Fob Learn mode and the display will show dx and -- (where

x is the slot on the keypad from 1 to 8.

(5) Press all 4 buttons on the fob and the display will show dx followed by the

serial number.

(6) Press Ø to accept the programming or # to reject and retry.

(7) Press the Ø key to finish.

(8) Repeat for each keyfob to be used then press Ø until the keypad returns to

normal mode.

2. Proceed as per Standard mode from point 1 above.

Note: If a keyfob is programmed into the panel when it has not been programmed into

the keypad it will not operate in High security mode.

Deleting Keyfobs

To delete a fob, enter code, 8, user number. Wait for the double beep, then press the

Ø key. The fob is now deleted.

6128RFH Keypad Operation

The following notes cover the use of the 6128RFH keypad with the Accord Panel.

There are some functional differences between this keypad and the other Accord

keypads, mostly concerning the keypad display. The main user functions are identical.

There is a separate user manual included to cover the 6128RFH keypad.

Hot Keys

The hot key functions use different buttons on the 6128 Keypad. They are detailed in

the user manual. However, it is strongly advised that the Easy Set function is not

used when the hot keys are enabled. This is to avoid the possibility of a user acciden-

tally activating a fire alarm when attempting to Night set the system. In Easy set,

Night set is # then 3. However # & 3 together activates the fire function. Easy set is

defaulted off. If both functions are required, then please connect an Accord LCD

keypad (2011-129), along with the 6128, and have the LCD keypad as the main users’

keypad.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 77 78

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 60