ADEMCO Accord Manual de instalación descargar pdf (Pagina 27)

Programming Groups 1, 2 and 3 (Zone Programming For Full,

Part and Night Set)

Programming Groups one to three are used to programme the eight zones for each of

the three setting modes: Full, Part and Night Set. This allows zones to be isolated or

assigned different functions for each of the three setting conditions.

The available zone types are:

0. Not Used 5. 24 hr tamper

1. Final Exit 6. PA silent

2. Key switch 7. PA audible

3. Alarm 8. Push-to-set

4. Walk Through 9. Fire

Zone Programming — Group 1 Full Set

In programming mode:

• The first digit entered is 1 for Full Set.

• The second digit is the zone number 1 — 8.

• The third digit is the zone type, see table 3.2.

Example: In Programming Mode press 1 + 2 + 3. This programmes Zone 2 as an

Alarm in the Full Set mode and is accompanied by two beeps, indicating a

correct entry.

To view the programming: press the 1 key followed by 00. The zone type is indicated

on the keypad zone LEDs (Icon display) for zone 1 (accompanied by one beep), then

zone 2 (accompanied by one beep), etc.

Note: Zone type nine (Fire) is represented by the Tamper LED (9) and zone type

zero (Not used) is indicated by the Day LED (•).

Zone Programming — Group 2 Part Set

In programming mode:

• The first digit entered is 2 for Part Set.

• The second digit is the zone number 1 — 8.

• The third digit is the zone type.

teSlluF

puorG

enoZ

enoZtluafeD

epyT

11 )1(

12 )4(

13 )3(

14 )3(

15 )3(

16 )3(

17 )3(

18 )3(

Table 3.2 Full Set Zones

teStraP

puorG

enoZ

enoZtluafeD

epyT

21 )1(

22 )4(

23 )3(

24 )3(

25 )3(

26 )3(

27 )3(

28 )3(

Table 3.3 Part Set Zones

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 77 78

Comentarios a estos manuales

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Accord