ADEMCO Accord Manual de instalación descargar pdf (Pagina 55)

5 — 24 Hour Tamper

A 24 Hour Tamper zone is used for system tampers and for zones covering sensitive

areas such as stock rooms, fire doors, external bell box, etc.

If a 24 Hour Tamper zone is activated when the system is Unset, the keypads sound

and the corresponding zone LED (No.) on the keypad illuminates. External sounders

do not operate.

It is strongly recommended that a zone programmed as 24 Hour Tamper is pro-

grammed in one of the following ways:

• Programmed as 24 Hour Tamper in Groups 1 (Full Set), 2 (Part Set) and 3 (Night

Set).

• Programmed as 24 Hour Tamper in Group 1 (Full Set), and, 0 (Not Used) or 24

Hour Tamper in Groups 2 (Part Set) and 3 (Night Set).

Programming a zone in Group 1 (Full Set) also covers the unset condition.

6 — PA Silent

The PA Silent zone type is assigned to a panic button. Activation of a PA Silent zone

does not cause any audible indication and no indication is given on the keypad display

until a valid code is entered at the keypad. The activation is reported via the Accord

xpC dialler.

It is strongly recommended that a zone programmed as PA Silent is programmed in

one of the following ways:

• Programmed as PA Silent in Group 1 (Full Set), 2 (Part Set) and 3 (Night Set).

• Programmed as PA Silent in Group 1 (Full Set), and, 0 (Not Used) or PA Silent

in Groups 2 (Part Set) and 3 (Night Set).

Programming a zone in Group 1 (Full Set) also covers the unset condition.

7 — PA Audible

A PA Audible zone is assigned to a panic button. Activation of a PA Audible zone

initiates a full alarm condition. The activation is also reported via the Accord xpC

downloader.

It is strongly recommended that a zone programmed as PA Audible is programmed in

one of the following ways:

• Programmed as PA Audible in Groups 1 (Full Set), 2 (Part Set) and 3 (Night

Set).

• Programmed as PA Audible in Group 1 (Full Set), and, 0 (Not Used) or PA

Audible in Groups 2 (Part Set) and 3 (Night Set).

Programming a zone in Group 1 (Full Set) also covers the unset condition.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 55