ADEMCO Accord Manual de instalación descargar pdf (Pagina 51)

Group 9 — Option 7 Print Event Log

This option allows the system event log to be printed by a serial printer.

0. No Event Log Print

1. Print Event Log

The Event Log is printed from Programming Mode by Typing 971. This option

automatically resets to 0 and the log will not print again until this operation is re-

peated.

Pressing Öwill cancel the log print.

Note: See Appendix B for instructions on connecting a printer to the system.

Group 9 — Option 8 Factory Defaults

The control panel programming can be reset to the factory defaults.

0. No Reset

1. Reset (981must be entered twice within 5 seconds).

This option defaults to 0 (No Reset).

If the Engineer or Master User Code has been lost they can be defaulted separately

from the rest of the system. This is done from Day Mode:

• Power down the control.

• Re-power the control.

• Hold down the Ö and # keys together until two beeps are heard.

• The Engineer Code is now 9090 and the Manager Code is 1234.

Group 9 — Option 9 Show Software Version

Enter 991 to display a three digit version number.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 77 78

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 51