ADEMCO Accord Manual de instalación descargar pdf (Pagina 41)

Group #6 - Option 3 Walk Through Affects Confirm

This selects if a walk through type zones will contribute to confirmed alarms. This

option has two settings:

0 Not After Timeout

This setting means that if a walk through zone is activated during the set period before

an entry door has been opened, it will contribute towards a confirmed alarm. If it is

activated after an entry zone has been opened, even after the timeout, they will not

contribute to a confirmed alarm.

1 Whenever Activated

This setting means that a walk through zones will contribute to a confirmed alarm

whenever it is activated in the set condition, except when the entry timer is running.

Group #6 - Option 4 Full Reset for Unconfirmed Alarms

This option selects whether a full system reset is required for an unconfirmed alarm. If

enabled (1), then a reset as dictated in Group 5, Option 8 will be required for all

alarms. If disabled (0), then the entry of a user code to unset the system following an

unconfirmed alarm, will also reset the system.

Group #6 - Option 5 Signal Locked out zones

This option dictates at what point the re-arm occurs when activated zones are being

omitted and signalled to the monitoring station. There are two settings:

0 On Confirm Timeout

Omitted zones will send an omit signal at the end of the confirm time window.

1 On Bell Timeout

Omitted zones will send an omit signal at the end of the bell time.

Group #6 - Option 6 Entry Timer Clears Confirm Count

This options selects whether a single (unconfirmed) alarm activation is remembered

for the purposes of confirmation, after an entry door is open. This option has two

settings:

0 Resets Count

In this case, the confirmed alarm counter is reset to 0 as soon as an entry door is

opened.

1 Keep Count

In this case, the confirmed alarm counter is maintained. If there is one alarm activation

before the entry door is opened, and then another activation after the entry delay

expires, a confirmed alarm condition will be generated, provided that both activations

occur within the confirm time window.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 41